AEG CDP 4212: English

34

English

2. Connect the CD player to the power unit by inserting

Intended Use

the plug of the power unit into the DC 4.5 V socket (12).

This device is used for:

3. When using a power unit (DC 4.5V/600mA) ensure

the correct polarity according to the inscriptions on

• Playing back audio/MP3 CDs.

the CD player.

It is intended exclusively for this purpose and may only

be used as such. It may only be used in the manner

General Operation

described in these instructions for use. The device must

not be used for commercial purposes.

HOLD (16)

Any other use of this device is considered to be contrary

This blocks the functions of all keys on the device and

to the intended use and may result in damage to materi-

is intended to protect against a key being activated

als or even personal injury.

accidentally. When the switch is pushed to the right the

The  rm ETV – Elektro-Technische Vertriebsgesellschaft

word ”HOLD” appears in the display.

mbH does not accept any liability for damage caused as a

result of the use of this device contrary to its intended use.

OPEN (9)

For opening the CD compartment.

Commissioning the device

4,5 V socket (12)

CD deck transport protection

For connecting to a mains adapter.

• Shift the OPEN key (9) to the right to open the CD

compartment (8).

LINE-OUT (5)

• Remove the transport protection from the CD player

For connection to a stereo system, for example.

if present before use.

BBS (4)

Inserting the battery/batteries

This is used to amplify the bass sounds. With the func-

(battery/batteries not supplied)

tion switched on BBS appears in the display.

• Open the battery compartment (17) on the inside of

the machine.

VOLUME (7)

• Insert 2 1.5V R6, AA type batteries. Match the

This is used to control the volume.

polarities correctly (see the inside of the battery

compartment).

PHONES (6)

• Close the battery compartment.

• A battery symbol in the display indicates that the

For connecting to the headphones or earphones.

batteries need to be replaced.

• If the device is not used for a prolonged period,

Switching o

please remove the batteries in order to avoid the

You can turn the device o by pressing the 왎 STOP

leakage of battery acid.

button (3) once, or twice if the device is running.

CAUTION:

• Di erent battery types or new and used batteries

쫵 NOTE:

must not be used together.

If the device is not operated in stop mode, it switches

• Batteries are not to be disposed of together with

o automatically after approximately 30 seconds.

domestic wastes. Dispose of the used batteries at

the relevant collection bin or at your dealer’s.

Playing CDs

WARNING:

1. Shift the OPEN key (9) to the right to open the CD

Do not expose the batteries to high temperatures or

compartment.

direct sunlight. Never throw batteries into the  re.

2. Insert a CD with the label facing upwards and press

There is a danger of explosion!

carefully over the button until it snaps into place.

Close the CD compartment.

Mains Operation

3. Press the 왘II PLAY/PAUSE button (2) to switch the

(power pack not supplied)

device on and play back the CD. The letters „Cd“,

„ESP“ appear in the display and „MP3“  ashes. Then

It is possible to operate the device using the mains power

the number of tracks appears brie y together with

unit.

the total running time. The CD starts from the  rst

1. Insert the plug of the power unit into a correctly

track. The track currently being played and the time

installed 230V, 50 Hz wall socket.

that has elapsed are shown in the display.

05-CDP 4212.indd 305-CDP 4212.indd 34 03.04.2008 14:03:52 Uhr03.04.2008 14:03:52 Uhr