Vitek VT-1514 BK: ENGLISH

8

(23, 24 and 25) on the control panel will start

fee remnants, you can clean the filters with a

flashing.

small brush.

• When the control buttons stop flashing, press

• Wipe the coffee maker body with a soft damp

the espresso button (23) twice.

cloth. Do not use metal brushes or abrasives.

• Repeat the boiler cleaning procedure with

• Do not immerse the coffee maker body into

small intervals till there is no citric acid solu-

water or other liquids.

tion in the tank.

• After finishing of the cleaning process fill the

• Wash the removable parts of the coffee

tank (16) with water and repeat this proce-

maker with warm water and a soft detergent.

dure 2-3 times to wash off the rest of citric

acid or descaling reagent.

Drip trays

• Remove the lid from the tray, remove the tray

Note:

and pour out water, put the tray back to its

• To remove scale you can use special scale

place, put the grid on the tray.

removers, strictly following the instructions

• If necessary, wash the trays and the lids with

on their usage.

Cleaning

water and soft detergent, then rinse and dry.

• Cleaning the filters (20, 21): you can wash

the filters in a dish washing machine. If the

openings are blocked with the ground cof-

Troubleshooting

Technical specifications

Failure Cause Solution

The unit cannot be

No voltage in the socket.

Make sure that the socket is operating.

switched on

Check whether the plug is completely

The plug is not completely inserted

inserted into the socket.

into the socket.

Water leaks from the

The water tray is overfilled. Pour out water from the tray.

lower part of the unit

Coffee leakage from

Loose connection of filter and

Clean the edges of the filter.

the filter holder

boiler gasket, ground coffee got

on the edges of the filter.

Coffee

Wrong process of scale removal in

See chapters

has a foreign smell

the boiler

«Before using the unit», «Descaling» and

repeat described process several times.

Use fresh ground coffee.

Improper storage of coffee

Keep coffee in a dry cool place.

Steam doesn’t froth

Low temperature of the outgoing

Froth milk only after the illumination of

the milk

steam.

control buttons stops flashing.

Use narrow high container for frothed

milk.

The container is too big or of

Use only whole milk with fat content

improper size.

4-6%.

You used skimmed milk

All indicators and

The water tank (16) is empty. Fill the water tank (16) with water.

control buttons

illumination flash.

VT-1514_IM.indd 8 07.12.2012 9:29:24