AEG dab 4138: English

English

41

• Usethe

/ buttons (3) to navigate in the menu.

NOTE:

• UsetheREPEATALARM/SELECTbutton(9)toselecta

• YoucannottogglebetweenMonoandStereoduring

submenu, or confirm a setting.

DAB reception.

• Toexitthemenu,presstheMENUbutton(6).

• TomanuallysetaDABfrequency,proceedasde-

scribed in the “Settings menu” section.

NOTE:

• Ifyoudonotpressanybuttonwithin30seconds,the

menu is hidden.

Display additional DAB information

• Thecurrentlysetoptionishighlightedby“*“.

In DAB mode, you can display the following additional infor-

mation if broadcast by the radio station. To do so, press the

A Settings menu can be found in DAB mode, as well as in FM

INFO button (7).

mode.TheDABandFMmenuisexplainedbelowalongwith

TheDLStextisshownonthedisplaybydefault.

the general SYSTEM menu.

• DLS:ShortforDynamic Label Segment. This involves

DAB Menu

complementary data. This content may be e.g. informa-

tion about the station or the music title and artist being

The DAB menu is divided into menus: Full scan, Manual tune,

played.

DRC and Prune.

• Displaysthereceivedsignalstrength.

• Full scan: Starts the station scan. The DAB frequency

• Thisindicatesthestationcategory(e.g.Pop-Music,News

band is scanned for stations.

etc.).

• Manual tune: To do so you need to know the station

• Displaysthenameofthestationgroup(e.g.DRDeutsch-

frequency. This can be found on the internet site of the

land).

broadcasting service. Select individual frequencies using

• Frequencyofthecurrentradiostation.

the

/ buttons (3).

• The“SIGNALERROR”displayshowsthesignalquality.

• DRC: short for Digital Range Control (dynamic range).

The lower the adjacent figure, the better the quality.

The term DRC describes the ratio between the quietest

• DisplaysthedigitalAudioBitRate.

and the loudest sound. If the dynamic range is very high

• Displaythetime.

there are very soft sounds as well as very loud sounds.

• Displaythedate.

Under some circumstances this may present a problem

with playback. Let us assume that you are listening to a

Save station

radio station in a relatively loud environment. By increas-

1. If you have found the desired station, hold down the

ing the volume you can play the quiet sections louder.

PRESET button (12). The first preset location appears on

This however has the disadvantage that the loud sections

the display. If the preset location is still empty the word

become uncomfortably loud. It makes sense here to

EMPTY appears under PRESET STORE.

reduce the dynamic range. Select between the options:

2. For choosing the memory position, please press

/

- DRC off: The dynamic range is not reduced.

buttons (3).

- DRC high: The dynamic range is sharply reduced.

3. Press REPEAT ALARM/SELECT to save the settings.

- DRC low: The dynamic range is slightly reduced.

• Prune: It may be that you can no longer receive some

Select a preset station

stations after a station scan or change of location. With

1. Press the PRESET button (12).

this function you can delete these stations from the

2. Press the

/ buttons (3) to chose a memory position.

reception list. Select “YES” and confirm with the REPEAT

3. Confirm your selection with the REPEAT ALARM/SELECT

ALARM/SELECT button.

button (9).

FM Menu

• Scan setting: Select the desired option in order to per-

Settings menu

form an automatic station scan.

Numerous settings are made via the Settings menu (see

- Strong stations only: Only search for strong radio

page 5).

stations.

- All stations: Search for all receivable radio stations. In

In the Settings menu you can find the main menu and the

doing so, the scan also pauses on weak stations.

related submenus with the individual options.

• Audio setting:

To open the menu, press the MENU button (6) during opera-

- Forced mono: Every radio station is played back in

tion.

mono irrespective of the transmitted signal.