AEG dab 4138: English

42

English

DAB + FM Menu (SYSTEM)

6. Finally select the volume at which you want to be awak-

The following submenus can be found in the SYSTEM menu.

ened. The lowest volume is indicated by four blocks.

7. Activate the alarm time by selecting “ALARM ON”.

• Time: Set the time and the date manually. You can also

set the automatic update and the display format of the

After you have made all your settings, the message “ALARM

date.

SAVED” briefly appears. The activated alarm function is

- Set Time/Date: Here, you can manually set the time

shown on the display by the “

“ symbol.

and date.

- Auto update: Here, select the source from which the

Turn off the alarm signal

automatic update of time and date should be carried

To shut off the alarm signal, press the ALARM ON/OFF but-

out. Select from: Update from all sources, DAB only,

ton (10).

FM only and no update.

- Set 12/24 hour: Select between 24 hour and 12 hour

Snooze

display.

The automatically set alarm function can be shut off for 5 or

10 minutes. Press the SLEEP button repeatedly to select the

NOTE: In 12 hour display

desired time.

AM = morning, PM = afternoon appears.

- Set date format: Select between the two options for

NOTE:

displaying the date. Day-Month-Year or Month-Day-

IftheSnoozefunctionisactivated,thetimeuntilthenext

Year.

alarm is shown on the display.

• Backlight: Set the time after which the display light

should be dimmed. If “ON” is selected, the display light

Deactivate alarm function

remains on permanently.

1. Press the ALARM ON/OFF button (10).

• Factory reset: Select the “YES” command if you want to

2. Press the

button.

reset the device again to the factory defaults. All settings

3. Use the

/ buttons to select “ALARM OFF”. Confirm

which you have made will be lost.

with the REPEAT ALARM/SELECT button.

• SW version: Here, you can display the Software Version

of the device.

Cleaning and maintenance

Alarm function

CAUTION:

You can set the device in such a way that it switches on at a

Do not immerse the device in water.

specific time.

• Disconnectthemainsplugbeforecleaning.

• Toselectanoption,pressthe

/ buttons (3).

• Youmaywipeoffexternalstains,usingaslightlydamp

• SelectanoptionwiththeREPEATALARM/SELECTbut-

cloth without any additives.

ton (9).

Troubleshooting

Setting the alarm time

1. Press the ALARM ON/OFF button (10). “ALARM 1

Problem Cause Solution

SETUP” appears on the display.

The unit cannot

The unit is blocked

Pull the mains plug

2. Now set the alarm time.

be operated

and “hangs”

forapproximately5

3. DURATION: Set the time, after which the device will

seconds. Then connect

switch off automatically.

the unit again

4. SOURCE: Select a source by which you want to be awak-

Reset the device to the

ened. Select from: BUZZER (beep), DAB, FM.

factory defaults.

see

4a If DAB or FM has been selected, now select the desired

“Settings menu”

radio station which should play when the set alarm time

No DAB Radio

Telescopic antenna

Fullyextendthe

is reached. Select from: LAST LISTEND and the preset

reception

incorrectly aligned

telescopic antenna and

radio stations on the station buttons.

align it vertically.

5. Select the time at which the alarm time needs to be acti-

No Digital Radio

vated. Select from: DAILY, ONCE, WEEKENDS, WEEK-

can be received in

DAYS.

your area

5a If ONCE is selected, now set the date at which you want

to be awakened.