AEG dab 4138: English

English

39

2. Insert 4 R6 “AA” batteries 1.5 V. Mind the correct polarity

Overview of the components

(indicated on the bottom of the battery case)!

Front

3. Close the battery case.

1 Telescopic antenna

4. Ifthedeviceisnotusedforanextendedperiodoftime,

2 LCD display

remove the batteries from the device to avoid any leaking

3

/ buttons (Scan forwards/ backwards)

of battery acid.

4 VOL+/VOL buttons (volume)

CAUTION:

5 SCAN button (scan)

• Neverusedifferentbatterytypesornewandusedbat-

6 MENU button (open menu)

teries together.

7 INFO button (show information)

• Batteriesmustnotbedisposedofinthegarbage.

8 POWER button (standby/ operation)

Please bring used batteries to competent collection

9 REPEAT ALARM/SELECT button (repeat alarm/ confirm)

centers or back to the dealer.

10 ALARM ON/OFF button (alarm On/ Off)

11 SOURCE button

WARNING:

12 PRESET button

Donotexposebatteriestoanyhightemperaturessuchas

13 SLEEP button (snooze)

sunlight, fire, or the like. There is a danger of explosion!

Rear view (without illustration)

NOTE:

Battery compartment

• Ifyouhaveconnectedthepowersupply,thebatteries

DC IN 6 V connector

are automatically deactivated.

OFF/ON switch (On / Off)

• Alwaysswitchoffthedeviceduringnon-usewiththe

OFF ON switch on the back, to not unnecessarily

Installation

stress the batteries. To display the time as accurately as

possible, the device will synchronize the time with the

• Readthemanualthoroughlybeforeoperatingthede-

radio station in the background. This results in a higher

vice!

battery consumption. In the worst case scenario, the

• Chooseasuitablelocationforthedevice.Suitableloca-

batteries could be discharged prematurely.

tions are dry, even and antislip surfaces on which you may

When shutting off the device with the OFF ON switch,

operate the device easily.

the time/ alarm time will be lost.

• Makesurethereisproperventilationforthedevice!

• Remove,ifnecessary,theprotectionsheetfromthe

display.

Installation

1. Fullyextendthetelescopicantenna(1).Standitupright

Power supply (Adaptor)

for initial installation.

• Insertthegridplugintoaproperlyinstalledthreeprong

2. Switch the device on at the back of the device using the

socket. Connect the device with the plug connector by

OFF/ON switch. The device automatically searches for

inserting its plug into the DC 6 V jack of the device.

DAB stations. SCANNING… and a progress bar appears

• Makesurethegridvoltagecorrespondstothegureson

on the display. The figure on the right of the display

the rating plate.

shows the number of radio stations found. The first alpha-

CAUTION:

numeric DAB station is played.

• Onlyusethesuppliedpoweradaptorforthisdevice.

When playing a radio station, the time and date is taken

Do not use for other devices.

from the broadcasting service. If the device does not re-

• Only use power adaptor with 6 V (

), other

ceive DAB stations in your location, set the time manually

adaptors may cause damage to the device.

as described in “Settings menu”.

NOTE:

Changing the OSD language

Disconnect from mains power supply during longer periods

TheOSDmenuissetinGermanexfactory.Tochangethe

of non-use.

language, proceed as follows:

1. Press the MENU button (6).

Battery Operation

2. Select the menu option “SYSTEM” with the

/ buttons

(3). Set it with the REPEAT ALARM/SELECT button (9).

You also have the option of operating the unit with 4 Type R6

3. Select the menu option “LANGUAGE” with the / but-

“AA” batteries.

tons. Set it with the REPEAT ALARM/SELECT button.

1. Open the battery compartment on the back.

4. Select the desired language with the / buttons. Set it

with the REPEAT ALARM/SELECT button.