AEG BMG 5610: English

134

English

7. Clean the monitor with a dry, soft cloth or a soft cloth squeezed well after moistened with water,

diluted disinfectant alcohol, or diluted soapsuds.

8. No component in the monitor can be serviced by the user. The circuit diagrams, component part

lists, descriptions, calibration instructions, or other information which will assist the user’s appropriately

qualified technical personnel to repair those parts of equipment which are designated repairably can

be supplied.

9. The monitor can maintain the safety and performance characteristics for a minimum of 10,000 mea-

surements or three years, and the cuff can maintain the performance characteristics for a minimum of

1000 measurements.

10. It is recommended that the cuff should be disinfected 2 times every week if needed (for example, in

a hospital or in a clinic). Wipe the inner side (the side that contacts skin) of the cuff with a soft cloth

moistened with ethyl alcohol (75-90%) and squeezed, then dry the cuff by airing.

EXPLANATION OF SYMBOLS ON UNIT

Symbol for ”THE OPERATION GUIDE MUST BE READ”

Symbol for “WARNING”

Symbol for “TYPE BF APPLIED PARTS” (the cuff is a type BF applied part)

English

135

Symbol for “ENVIRONMENT PROTECTION” - Waste electrical products should not be

disposed of with household waste. Please recycle where facilities exist. Check with your local

Authority or retailer for recycling advice.

Symbol for “MANUFACTURER”

Symbol for “COMPLIES WITH MDD93/42/EEC REQUIREMENTS”

Symbol for “DATE OF MANUFACTURE”

Symbol for “EUROPEAN REPRESENTATION”

SN Symbol for “SERIAL NUMBER”

Symbol for “KEEP DRY”