Vitek VT-4201 SR: E N G L I S H

9

– dry the lid (8), protection screen (7) and sili-

DELIVERY SET

cone gasket thoroughly;

Multi-cooker (with a lid) – 1 pc.

– place the silicone gasket on the protection

Bowl – 1 pc.

screen (7) and the protection screen (7) - on

Soup ladle – 1 pc.

the lid (8).

Spatula – 1 pc.

• Wipe the surface of the heating element (only

Measuring cup – 1 pc.

when it is cold), do not allow water to get

Instruction manual – 1 pc.

inside the unit body.

• Do not immerse the unit body, power cord

TECHNICAL SPECIFICTAIONS

and plug into the water or other liquids.

Power supply: 220-240 V ~ 50/60Hz

• Clean the multi-cooker body with a damp

Power: 1000-1190 W

cloth and then wipe dry.

Maximal capacity: 6 L

• Do not use abrasive and aggressive deter-

gents for washing of the unit and accessories.

• Keep the multi-cooker away from children in

a dry cool place.

TROUBLES AND TROUBLESHOOTING

Failure Possible Cause Solution

The multi-cooker lid can’t

The silicone gasket or pro-

Remove the protection screen, check

be closed.

tection screen (7) is installed

whether the silicone gasket is installed

improperly.

properly.

The blocking system valve is

Remove the blocking object from the

blocked in the upper position.

valve.

The pressure in the multi-

The blocking system valve (11)

Press the valve on the lid handle and

cooker has been released,

has not moved to the lower

set it down.

but the lid can’t be opened.

position.

Steam is released from

The silicone gasket is not

Switch the unit off, release the pres-

the lid (8) bottom during

installed on the protection

sure in the multi-cooker, open the

cooking.

screen (7).

lid. Place the silicone gasket on the

protection screen (7).

The silicone gasket is very dirty. Clean the silicone gasket.

The silicone gasket is dam-

Replace the silicone gasket.

aged.

The lid (8) is not closed tightly. Close the lid (8) tightly.

Air release through the

The valve is dirty. Switch off the multi-cooker, remove

blocking system valve (11).

the lid and and clean the valve.

The silicone ring of the blocking

Replace the silicone ring of the valve.

system valve is damaged.

The blocking system valve

The pressure control valve (10)

Set the pressure control valve to the

(11) does not go up.

is installed improperly.

position

.

Not enough ingredients or liq-

Follow the recommendations for

uid for steam generation.

amount of products and liquid in the

bowl (6).

Repeated sound signal. The multi-cooker is overheated. Unplug the multi-cooker, open the lid

and let it cool down.

The manufacturer preserves the right to change the specifications of the unit without a preliminary

notification.

VT-4201_IM.indd 9 16.04.2013 17:11:24