Vitek VT-4201 SR: E N G L I S H

7

– The current time is shown on the display (3)

– Insert the plug into the mains socket, you will

by the «Time-time» indicator

hear a sound signal and the display (3) back-

Note: If no actions for current time setting are

light will be switched on.

taken or the button (18) is not pressed within 1

minute, the display light will be switched off and

Auto-cooking programs

the display indications will remain unchanged.

– To choose an auto-cooking program press

the “MENU” button (16), the indicator of the

USING OF THE Multi-cooker

chosen auto-cooking program will blink on

– Put the food into the cooking bowl (6) follow-

the display (3).

ing the recommendations given in the recipes

– To launch the auto-cooking program press

(see “Recipe book”).

“START/STOP” button (18) once, the heating

Note: Make sure that the level of prod-

element will be switched on and the indicator

ucts and liquids doesn’t exceed the maximal

of the chosen program will stop blinking on

mark. The maximal mark for different por-

the display (3).

ridges (except rice) is 3L, the maximal mark

– To stop the auto-cooking program press the

for other products and liquids is 5L. The mini-

“START/STOP” button (18) once again, the

mal level of the products in the bowl is 1L.

heating element will be switched off and all

– Place the bowl (6) into the unit body. Make

program indicators will light up on the dis-

sure that the bowl (6) is placed evenly and

play (3).

has a tight contact with the heating element

Attention:

surface (fig. 4).

– You can set the cooking time in the “CAKE”

Note:

and “REHEAT” modes manually, to do this

– Do not use the bowl (6) for washing cere-

choose the required program using the

als and do not chop products in it, this can

“MENU” button (16) and consequently press

damage the non-stick coating.

or hold the “HOURS” (23) and “MINUTES”

– Wipe the outer surface and the bottom of

(17) buttons.

the bowl (6) dry before use.

– The set duration of the program is shown on

– Make sure that there are no foreign

the display (3) with the “End time” indicator

objects, dirt and moisture on the heating

Note:

element surface and on the bottom of the

– the duration of the”CAKE” program can be

bowl (6).

set from 20 minutes to one hour, the step is

– In the middle of the heating element there

1 minute.

is a temperature sensor . Make sure that

– the duration of the “REHEAT” program can

the movement of the sensor is not limited.

be set from 5 minutes to two hours, the hours

– Before installing the lid check the blocking

step is 1 hour; the minutes step is 1 minute.

system elements (11). They should be clean

– In the “CAKE” and “REHEAT” programs the

and the blocking system valve (11) in the han-

current time indication “Time-time” on the

dle (9) should be lowered (fig. 5).

display (3) and duration of the chosen pro-

– Place the lid (8) on the unit body with the lid

gram “End time” will be changed with an

blocking system towards the «OPEN- CLOSE»

interval of 1 minute.

indicator on the unit body and turn the lid

– To launch the program press the “START/

(8) counterclockwise till the complete lock-

STOP” button (18) once, the heating ele-

ing (fig. 6).

ment will be switched on and the indicator of

the chosen program will stop blinking on the

– Set the valve (9) to the position (fig. 7),

display (3).

in this position the excessive pressure will

– To stop the program press the “START/STOP”

be released through the valve during the unit

button (18) once again, the heating element

operation.

will be switched off and all program indicators

– Insert the power cord connector into the

will light up on the display (3).

socket on the back side of the multi-cooker

Setting of the cooking end time

body.

– If the current time is not set, set it as described

above.

VT-4201_IM.indd 7 16.04.2013 17:11:23