Vitek VT-1227: ENGLISH

ENGLISH: Vitek VT-1227

ENGLISH

Fill the water tank with water as described

Avoid touching the iron sole with sharp

in the corresponding section.

metal objects.

Insert the power plug into the socket.

Set the temperature control (9) to the

STORAGE

“MAX” position, the indicator (7) will light

Turn the temperature control (9) anti-

up.

clockwise to the “MIN” position, set the

Place the iron vertically.

constant steam supply button (12) to the

When the sole temperature (12) reaches

upper position (steam supply is off).

the desired temperature value, the (7) in-

Take the plug out of the socket.

dicator will go out, you can start ironing.

Set the iron vertically and allow it to cool

Switch on constant steam supply, by

down completely.

pressing the button (2) (steam supply

Open the water tank lid (4), turn over the

is on); steam will be outgoing from the

iron and drain any remaining water from

openings of the iron sole (12).

the water tank (5).

After usage set the temperature control

Close the lid (4).

(9) to the “MIN” position, switch off con-

Store the iron vertically in a cool dry place

stant steam supply by pressing the con-

out of reach of children.

stant steam supply button (2) (in the up-

per position of the button steam supply is

Delivery set

off).

1. Iron – 1 pc.

Take the plug out of the socket and wait

2. Water tank – 1 pc.

until the iron cools down completely.

3. Traveling bag – 1 pc.

Open the lid (4) and pour out water from

4. Instruction manual – 1 pc.

the tank.

Press the button (11) and lower the han-

SPECIFICATIONS

dle (6) down.

Power supply: 120/240 V, ~ 50/60 Hz

Power consumption: 1000 W

ATTENTION!

If during the operation steam is not con-

Specifications subject to change without

stantly supplied, check whether the tem-

prior notice.

perature control (9) is set properly, check

the position of the button (2) and whether

Service life of appliance - 3 years

there is water in the water tank (5).

GUARANTEE

Details regarding guarantee conditions can

CLEANING AND CARE

be obtained from the dealer from whom

Make sure that it is unplugged and has

the appliance was purchased. The bill of

cooled completely.

sale or receipt must be produced when

Wipe the iron's outer surface with a damp

making any claim under the terms of this

cloth and then wipe dry.

guarantee.

Sediment on the iron sole can be re-

moved with a cloth soaked in vinegar-

This product conforms to the EMC-

water solution.

Requirements as laid down by the

After removing sediment, polish the sole

Council Directive 89/336/EEC

with a dry cloth.

and to the Law Voltage Regulation

Do not use abrasive substances to clean

(73/23 EEC)

the sole and the body of the iron.

6

1227.indd 61227.indd 6 21.03.2011 12:51:3621.03.2011 12:51:36