Vitek VT-3790: ENGLISH

ENGLISH

PORTABLE CD/MP3 PLAYER

adapter operating voltage corresponds

WITH USB/MMC SLOT

to the voltage of the local power network.

• When there is no power in your supply

Before using the device, please, read these

network, disconnect the power adapter

instructions attentively.

from the outlet.

• Don't touch the adapter with wet hands.

FUNCTIONS AND CONTROL

1. CD compartment door

Power supply from batteries

2. NEXT/SEARCH FORWARD button

1. Disconnect the power adapter both from

3. PLAY MODE button

the AC outlet and the player.

4. PLAY/PAUSE button

2. Open the battery compartment.

5. ASP/DIR/NEXT button

3. Insert two Ni?MH batteries (1.2V

6. PROGRAM button

1200mA/h) (supplied with the device),

7. Accumulator batteries compartment

observing their polarity.

8. LED Display

4. Close the battery compartment door.

9. STOP/FUNCTION button (power off)

5. Set the battery charge switch to the ON

10. PREVIOUS/SEARCH BACKWARD button

position to start charging, the red

11. Headphones jack

CHARGE indicator will light up.

12. Battery charge indicator

13. CD door open button

ATTENTION: to prevent damaging the

14. Volume control

device and batteries, the duration of one

15. Linear output jack

charging cycle should not exceed 12 hours.

16. Battery charge switch

17. Bass boost switch

CAUTION:

18. Control buttons locking switch

• Do not use (Ni?MH) and usual (for exam?

19. Power adapter jack

ple, zinc?carbon) batteries simultane?

20. USB jack

ously.

21. SD/MMC memory cards jack

• Do not charge the batteries for more than

12 hours.

POWER

Power supply from the power adapter (sup?

Note:

plied with the device)

• When batteries are charged for the first

1. Insert the plug end of the power adapter

time, 15 hours are needed to fully charge

cord into the power adapter jack (19).

them.

2. Connect the power adapter to AC 220?

• If the batteries operation time has con

230V ~ 50 Hz power outlet.

siderably reduced, even when charged

properly, buy a new set of batteries.

Note:

• If batteries are installed inside the device

CONNECTION

when connecting the power adapter, the

Connection to audio system

device will automatically switch to the AC

Connect the stereo cable (not included with

power (adapter).

the device) to the linear output jack LINE

• Use only the adapter included with the

OUT (15) and to the audio system jack

player. Using other adapters can dam

CD/AUX.

age the device.

• Before connecting make sure that the

4

ENGLISH

Note: Before connecting the player to the

Total number of albums (folders) and total

audio system, disconnect both devices

number of tracks will be shown on the dis?

from the AC network.

play for a short time.

During playback, the LED display will show

HEADPHONES

the track related information (name of the

Insert the headphones plug (supplied with

artist, album, song).

the device) into the headphones jack on the

Note: Information on the current track will

player.

be displayed only if it is present on the disc.

CD / MP3 PLAYBACK

Note:

1. Insert the headphones plug (supplied

• If during playback the CD compartment

with the device) into the headphones

(1) door is open, LED display will show

jack on the player.

"OPEN".

2. Press the CD door open button (13).

• Press the STOP button (9) before press

3. Insert the CD with a label side up.

ing the CD door open button (13).

4. Close the CD door.

• The player can play 3inch (8 cm) discs

5. Set the VOLUME control (14) to the mini?

without using a special adapter.

mum level.

6. Press the PLAY/PAUSE (4;) button (4),

SELECTING TRACKS OR SEARH BY A

the device automatically turns on,

MUSIC FRAGMENT (CD)

"READING" appears on the LED display

1. Press the PREVIOUS/SEARCH BACK?

and playback starts.

WARD (9) button (4)

7. Set a desirable volume level.

2. Several times press the PREVIOUS/

8. To pause playback, press the

SEARCH BACKWARD (9) button (10) to

PLAY/PAUSE (4;) button (4). The track

select one of the previous tracks.

number and the elapsed playback time

3. Several times press the NEXT/SEARCH

will flash on the display. Once again press

FORWARD (:) button (2) to select one

PLAY/ PAUSE (4;) button (4) to resume

of the next tracks.

playback.

4. Press and hold the PREVIOUS/SEARCH

9. To stop playback, press the STOP button

BACKWARD (9) button (10) or the

(9).

NEXT/SEARCH FORWARD (:) button

10.To turn off the player, press and hold the

(2), to search by a music fragment of the

STOP button (9) for over 2 seconds.

track.

CD PLAYBACK

Note: When searching by a music fragment,

Press the PLAY /PAUSE (4;) button (4) to

the tracks will be played in accelerated

start playback.

mode at a low volume level.

Total number of tracks and total disc play?

back time will be shown on the display for a

SEARCHING TRACKS (MP3)

short time. During playback, the display will

1. Press the PREVIOUS/SEARCH BACK?

show the current track number and its

WARD (9) button (10) to go to the begin?

elapsing playback time.

ning of the current track.

2. Several times press the PREVIOUS/

MP3 PLAYBACK

SEARCH BACKWARD (9) button (10) to

Press the PLAY /PAUSE (4;) button (4) to

select one of the previous tracks.

start playback.

3. Several times press the NEXT/SEARCH

5

ENGLISH

FORWARD (:) button (2) to select one of

STOP button (9) or press the MODE but?

the next tracks.

ton (3) four times, after which the

" " symbol will disappear from the

REPEATED PLAYBACK MODE

display.

CD

4. To activate the repeated playback mode

1. Press the PLAY /PAUSE (4;) button (4)

for the entire disc, press the MODE but?

to start playback.

ton (3) three times. LED display will show

2. To activate the repeated playback mode

the " " symbol and all tracks on the

for a track, press the MODE button (3)

disc will be played repeatedly. To cancel

once. LED display will show the " "

the disc's Repeated Playback mode,

symbol and the track will be played

press the MODE button (3) three times,

repeatedly. To cancel the repeated play?

after which the " " symbol will disap?

back mode, press the STOP button (9) or

pear from the display.

press the MODE button (3) four times,

INTRO PLAY MODE

after which the " " symbol will disap?

CD

pear from the display.

1. Press the STOP button (9).

3. To activate the repeated playback mode

2. To activate the INTRO mode, press the

for the entire disc, press the MODE but?

MODE button (3) three times, "INTRO"

ton (3). LED display will show the " "

will appear on the display.

symbol and all tracks on the disc will be

3. Press the PLAY/PAUSE button (4), each

played repeatedly. To cancel the disc

track on the disc will be played for 10

repeated playback mode, press the

seconds.

MODE button (3) three times, after which

4. Press the MODE button (3) two times, to

the " " symbol will disappear from the

cancel the INTRO mode and return to the

display.

playback mode.

MP3

МР3

1. Press the PLAY/PAUSE (4;) button (4),

1. Press the STOP button (9).

the track playback starts.

2. To activate the INTRO mode, press the

2. To activate the repeated playback mode

MODE button (3) four times, "INTRO" will

for a track, press the MODE button (3)

appear on the display.

once. LED display will show the " "

3. Press the PLAY/PAUSE (4;) button (4),

symbol and the track will be played

each track on the disc will be played for

repeatedly. To cancel the repeated play?

10 seconds.

back mode, press the STOP button (9) or

4. Press the MODE button (3) two times, to

press the MODE button (3) five times,

cancel the INTRO mode and return to the

playback mode.

after which the " " symbol will disap?

pear from the display.

RANDOM PLAYBACK

3. To activate the album (folder) repeated

CD

playback mode, press the MODE button

1. Press the STOP button (9).

(3) twice. LED display will show the

2. To activate the RANDOM PLAYBACK

" " symbol and the album (folder)

mode, press the MODE button (3) four

will be played repeatedly. To cancel the

times, "RAND" will appear on the display.

repeated playback mode, press the

6

ENGLISH

Now press the PLAY/PAUSE button (4), to

edly, press the MODE button (3) until the

start random playback of the disc's

" " indicator appears on the display.

tracks.

3. Press the NEXT/SEARCH FORWARD (:)

МР3

button (2) to move to the next, randomly

1. Press the PROGRAM button (6). "PROG"

selected, track.

will appear on the LED display, where 00

4. Press the MODE button (3) once to return

? the track's number, P?01 ? the track's

to usual playback mode.

order number in the program.

2. The album number starts flashing in the

МР3

upper right corner of the LED display.

1. Press the STOP button (9).

Using the NEXT/SEARCH FORWARD (:)

2. To activate the RANDOM PLAYBACK

button (2) or PREV/SEARCH BACKWARD

mode, press the MODE button (3) five

(9) button (10), select the album/folder

times, "RAND" will appear on the display.

containing the desired track and press

Then press the PLAY/PAUSE (4;) but?

the PGM button (6).

ton (4), to start random playback of the

3. Using the NEXT/SEARCH FORWARD (:)

disc's tracks.

button (2) or PREV/SEARCH BACKWARD

3. Press the NEXT/SEARCH FORWARD (:)

(9) button (10), select the desired track

button (2) to move to the next, randomly

to be programmed.

selected, track.

4. By pressing the PGM button (6) once,

4. Press the MODE button (3) once to return

include the track into the program.

to usual playback mode.

5. Repeat the actions described on steps 2

?5, to program other tracks (up to 64

PROGRAM PLAYBACK

tracks).

CD

6. To start the program playback, press the

1. Press the PROGRAM button (6). "PROG"

PLAY/PAUSE (4;) button (4) once.

will appear on the LED display, where 00

7. To cancel the program playback, press

? the track's number, P?01 ? the track's

the STOP button (9).

order number in the program.

2. To select a track for the program, press

TRACK SEARCH BY ITS NAME (MP3)

the NEXT/SEARCH FORWARD (:) but?

Searching by the track (file) name

ton (2) or PREV/SEARCH BACKWARD

• Press the ASP/DIR/NEXT button (5), "A"

(9) button (10).

will appear in the upper right corner of

3. By pressing the PROGRAM button (6)

the LED display and the " " will start

once, include the track into the program.

flashing, indicating the Search by Track

4. Repeat the actions described on steps 2

Name mode.

and 3, to program other tracks (up to 64

• Using the NEXT/SEARCH FORWARD (:)

tracks).

button (2) or PREV/SEARCH BACKWARD

5. To start the program playback, press the

(9) button (10), select the needed letter.

PLAY/PAUSE (4;) button (4) once.

The LED display will show the track which

6. To cancel the program playback, press

name starts with this letter.

the STOP button (9).

• Press the PLAY/PAUSE (4;) button,

playback of the selected track starts.

Note: If, during the program playback, you

want to play all programmed tracks repeat

Note: Searching by the track name is possi

ble only if the track was assigned the name

7

ENGLISH

when recoding the MP3 disc. If the disc

and hold the MODE button for over 2 sec?

contains tracks designated only by order

onds.

numbers or other symbols, searching by

the track name will be impossible.

Automatic power turning off

If over 60 seconds have passed after press?

Search by album name

ing the STOP button (9), the automatic

• Press the ASP/DIR/NEXT button (5)

power turn off function is activated and the

twice, "A" will appear in the upper right

player is turned off automatically. At press?

corner of the LED display and the " "

ing and holding the STOP button (9) for over

symbol will start flashing, indicating the

3 seconds, the player will be turned off.

Search by Album Name mode.

• Using the NEXT/SEARCH FORWARD (:)

Automatic shock protection function

button (2) or PREV/SEARCH BACKWARD

(ASP)

(9) button (10), select the needed letter.

• During playback the player can be sub?

The LED display will show the album

jected to mechanical shocks and vibra?

which name starts with this letter.

tion (for instance, when walking, or inside

• Press the PLAY/PAUSE (4;) button (4),

the moving car). The automatic shock

playback of the selected album starts.

protection function (ASP) allows to pre?

vent the interruption of sound when the

Note: Searching by the album name is pos

player is subjected to shocks or vibra?

sible only if the album (folder) was assigned

tion.

the name when recoding the MP3 disc. If

• When the PLAY/PAUSE button (4) is

the disc contains albums (folders) desig

pressed, "ASP" starts flashing on the dis?

nated only by order numbers or other sym

play. Flashing of "ASP" sign will stop,

bols, searching by the album name will be

when the data buffer of the memory

impossible.

becomes full.

• If the player is under continuous impact

SPECIAL FUNCTIONS

of shocking or vibration for over 45 sec?

Bass boost

onds (when playing CD discs) or over 120

Set the bass boost switch (17) into the "ON"

seconds (when playing MP3?discs),

position, to boost the low frequency tone.

playback may be interrupted for several

seconds. The playback will be resumed,

Note: As the low frequency sound depends

as soon as the action of shocking or

on the volume level, at high volume levels

vibration stops.

the sound may be distorted. Decrease the

• To cancel the ASP function, press the

volume level or set the Bass Boost switch to

ASP button once (possible, only when

"OFF".

playing CD discs).

Changing the display mode (only for

Note:

MP3)

When the automatic shock protection func

When playing MP3 tracks, the LED display

tion (ASP) is activated, the disc rotates

can show information on the current track.

faster then at usual playback, because the

Press and hold the MODE button (3) for over

disc data are taken into the device's operat

2 seconds. The display will show the album

ing memory, so the batteries become dis

number, file number and playback time.

charged faster.

To return to the initial display mode, press

8

ENGLISH

Use the ASP function only when necessary,

Handling CDs

to save the batteries charge.

Handle the discs carefully. Hold discs only

by the edges. Never touch the polished disc

NOTE: When playing MP3 discs, the ASP

surface.

function is constantly turned on, and cannot

Do not stick scotch, stickers, etc., to the

be deactivated.

label side of the disc.

Periodically wipe discs with a soft (not fluffy)

Locking of control buttons (HOLD)

dry cloth. Never use cleaning aerosols or

The device is equipped with control buttons

antistatic agents for cleaning discs. If nec?

lock function ? HOLD (18) To lock the control

essary, buy a special kit for cleaning CDs.

buttons, set the lock switch (19) to "ON".

If the disc skips tracks or gets stuck in cer?

tain spots, then the disc may be dirty or

SD/MMC memory cards jack

damaged (scratched).

In the stop mode insert a SD/MMC card

Wipe discs from center to outer edges in

containing MP3 files into the memory card

straight movements. Never wipe discs in cir?

jack (21). When the STOP button (9) is

cular motion.

pressed for a short time, the "CARD?USB"

To remove the disc from its case, press the

will be shown on the display, and then the

center part of the case and remove the disc,

SD/MMC card contents will be read. The

holding it carefully by the edges.

LED display will show the total number of

Remove fingerprints and dust from the disc

MP3 files in the memory card. To start play?

surface with a soft cloth. Compact discs dif?

back, press the PLAY/PAUSE button (4). To

fer from traditional recordings in that they

activate again the disc playback mode,

do not have any grooves where dust can

press the STOP button (9) for a short time,

collect, so careful cleaning with a soft cloth

the "CD?DISC" mode will be activated.

should remove most of the particles.

USB jack

In the stop mode insert the USB cable (sup?

plied with the device) into the USB jack and

connect a USB flash card to it, containing

MP3 files. . When the STOP button (9) is

pressed for a short time, the "CARD?USB"

will be shown on the display, and then the

flash card contents will be read. The LED

display will show the total number of MP3

files in the memory card. To start playback,

press the PLAY/PAUSE button (4).

To activate again the disc playback mode,

press the STOP button (9) for a short time,

the "CD?DISC" mode will be activated.

MAINTENANCE

Cleaning the device

Wipe the device exterior with a soft cloth

dipped in soapy water.

9