Vitek VT-1260: ENGLISH

ENGLISH

Important information

• After removing sediment, polish the soleplate

• Vertical steaming is not recommended for

with a dry cloth.

synthetic fabrics.

• Do not use abrasive substances to clean the

• To avoid melting the fabric, do not touch the

soleplate and body of the iron.

iron soleplate to the item while steaming.

• Avoid touching the iron soleplate with sharp

• Never steam iron clothes on a person as the

metal objects.

steam temperature is very high and it can

cause burns. Use a coat-hanger or a stand.

STORAGE

• Turn the temperature control (7) anticlockwise

STEAM CHAMBER CLEANING

till the “MIN” position.

To prolong lifetime of the iron we recommend

• Unplug the unit.

cleaning the steam chamber, especially in the

• Set the iron vertically and allow it to cool com-

regions with “hard” water.

pletely.

• Fill the water tank (10) with water.

• Set the constant steam supply control (3) to

• Put the iron on the base (8).

the “

” position (steam supply is off).

• Insert the power plug into the socket.

• Open the filling opening lid (9), turn over the

• Set the constant steam supply control (3) to

unit and drain the remaining water (10). Close

the “

” position (steam supply is off).

the lid (9) (pic.9).

• Set the temperature control (7) to the “MAX”

• Store the iron vertically in a dry cool place out

temperature of the iron soleplate, the indicator

of reach of children.

in the temperature control (7) will light up.

• When the soleplate temperature (5) reaches

Delivery set

the desired temperature value, the indicator

Iron – 1 pc.

will go out, you can start cleaning.

• Switch off the unit, by setting the temperature

TECHNICAL CHARACTERISTICS

control (7) to the “MIN” position.

Power supply: 220-240 V ~ 50 Hz

• Unplug the unit.

Maximal power consumption: 2200 W

• Hold the iron above the sink horizontally; set

and hold the control to the

position (pic 8).

Specifications subject to change without prior

• Boiling water together with scale will be throw-

notice.

ing out from the openings in the iron soleplate

(5).

Service life of appliance - 3 years

• Slightly sway the iron back and forth, until wa-

ter goes out of the water tank.

GUARANTEE

• Place the iron on the base (8) and let it cool

Details regarding guarantee conditions can be

down completely.

obtained from the dealer from whom the appli-

• Set the constant steam supply control (3) to

ance was purchased. The bill of sale or receipt

the “ ” position (steam supply is off).

must be produced when making any claim under

• When the soleplate (5) cools down completely,

the terms of this guarantee.

wipe it with a dry cloth.

• Before you take the iron for storing, make sure

This product conforms to the EMC-

that there is no water in the water tank and that

Requirements as laid down by the

the iron soleplate (5) is completely dry.

Council Directive 89/336/EEC and

to the Low Voltage Regulation (73/23

CLEAN AND CARE

EEC)

• Before cleaning the iron, make sure that it is

turned off and has cooled completely.

• Wipe the iron's outer surface with a damp cloth

to dry.

• Sediment on the iron soleplate can be removed

with a cloth soaked in vinegar-water solution.

7

1260.indd 71260.indd 7 24.08.2010 10:02:3124.08.2010 10:02:31