Vitek VT-1259: ENGLISH
ENGLISH: Vitek VT-1259
ENGLISH
Note:
(3) to set the intensity of steaming, steam
- While steam ironing set the tempera-
will start outgoing from the openings of the
ture to steam using zone or “max”
sole (8).
(•••).
• After you finish ironing set the (12) regula-
tor to the “minimum” position and the con-
WATER SPRAYER
stant steam supply regulator (3) to the “0”
• You can dampen the fabric by pressing the
(steam supply is off) position.
spray button (4) several times (pic. 6).
• Pull the plug out of the socket and let the
• Make sure that there is enough water in the
iron cool down completely.
water tank (11).
ATTENTION!
IRONING
If during the operation steam is not constant-
• Place the iron on the base (14).
ly supplied, check whether the temperature
• Insert the power plug into the socket.
regulator (12) is set properly and whether
• Set the temperature regulator (12) to the
there is water in the water tank.
required ironing temperature: “•”, “••”,
“•••” or “max” (•••) (pic.3), depending
ADDITIONAL STEAM RELEASE
on the type of fabric, the (13) indicator will
Additional steam release function is use-
light up.
ful when ironing folds and can only be used
• When the sole temperature (12) reaches
at high ironing temperatures (when the iron
the desired temperature value, the (13) in-
temperature regulator (12) is set to “max”
dicator will go out, you can start ironing.
(•••).
• After you finish ironing set the (12) regula-
When the additional steam release button (5)
tor to the “minimum” position.
is pressed, steam will be vigorously released
• Pull the plug out of the socket and let the
from the openings in the iron sole (pic.4).
iron cool down completely.
Note:
STEAM IRONING
- In order to avoid leakage of water from
For steam ironing set the temperature regu-
steam openings, press the additional
lator to steam using zone or “max” (•••).
steam supply button (5) with a 4-5 sec.
The iron has an anti-drop valve, which stops
interval.
water supply, when the sole temperature is
too low it prevents the appearance of drops
VERTICAL STEAMING
out of the sole openings (8). While heating
For vertical steaming can be used only when
or cooling down of the sole (8), you will hear
the high temperature mode is used (set the
clicks of opening/closing of the anti-drop
temperature regulator (12) to the “max” (•••)
valve; it means that the valve works normally.
position.
• Place the iron on the base (14).
Hold the iron vertically at the distance 15-
• Insert the power plug into the socket.
30 cm from the clothes press the additional
• Make sure that there is enough water in the
steam release button (5) with a 4-5 seconds
water tank (11).
interval, steam will be released from the
• Set the temperature regulator (12) to the
openings in the iron sole (8) (pic. 5).
required ironing temperature: to steam us-
ing zone or “max” (•••), the (13) indicator
Important information
will light up (Pic.3).
• Vertical steaming is not recommended for
• When the sole temperature (12) reaches
synthetic fabrics.
the desired temperature value, the (13) in-
• To avoid melting the fabric, do not touch
dicator will go out, you can start ironing.
the iron sole to the item while steaming.
• Turn the constant steam supply regulator
• Never steam iron clothes on a person as
6
1259.indd 61259.indd 6 16.07.2010 17:15:3816.07.2010 17:15:38
Оглавление
- ENGLISH
- ENGLISH
- ENGLISH
- ENGLISH
- DEUTSCH
- DEUTSCH
- DEUTSCH
- DEUTSCH
- DEUTSCH
- РУССКИЙ
- РУССКИЙ
- РУССКИЙ
- РУССКИЙ
- РУССКИЙ
- ҚАЗАҚ
- ҚАЗАҚ
- ҚАЗАҚ
- ҚАЗАҚ
- ҚАЗАҚ
- ROMÂNĂ
- ROMÂNĂ
- ROMÂNĂ
- ROMÂNĂ
- ROMÂNĂ
- ČESKÝ
- ČESKÝ
- ČESKÝ
- ČESKÝ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- БЕЛАРУСКI
- БЕЛАРУСКI
- БЕЛАРУСКI
- БЕЛАРУСКI
- БЕЛАРУСКI
- ЎЗБЕК
- ЎЗБЕК
- ЎЗБЕК
- ЎЗБЕК
- ЎЗБЕК