Vitek VT-1259: ENGLISH
ENGLISH: Vitek VT-1259
ENGLISH
the steam temperature is very high and it
• After removing sediment, polish the sole
can cause burns. Use a coat-hanger or a
with a dry cloth.
stand.
• Do not use abrasive substances to clean
the sole and body of the iron.
STEAM CHAMBER CLEANING
• Avoid touching the iron sole with sharp
To prolong lifetime of the iron we recommend
metal objects.
cleaning the steam chamber, especially in
the regions with “hard” water.
STORAGE
• Set the constant steam supply regulator (3)
• Turn the temperature regulator (12) anti-
to the “0” (steam supply is off) position.
clockwise till the “minimum” position, set
• Fill the water tank (11) till the “max” mark
the constant steam release regulator (3)
(9).
to the steam “0” (steam supply is off) posi-
• Put the iron on the base (14).
tion.
• Insert the power plug into the socket.
• Unplug the unit.
• Set the temperature regulator (12) to the
• Open the water tank lid (2), turn over the
“max” temperature, the (13) indicator will
iron and pour out any remaining water from
light up (Pic.3).
the water tank (11). Close the lid (2).
• When the sole temperature (8) reaches the
• Set the iron vertically and allow it to cool
desired temperature value, the (13) indica-
completely.
tor will go out, you can start cleaning.
• Wind the power cord of the unit (pic.8)
• Switch off the unit, by setting the tempera-
• Store the iron vertically in a dry cool place
ture regulator (12) to the “minimum” posi-
out of reach of children.
tion.
• Unplug the unit.
Delivery set
• Hold the iron above the sink horizontally,
Iron – 1 pc.
press and hold the SELF CLEAN button
Water bowl – 1pc.
(pic.7).
• Boiling water together with scale will be
TECHNICAL CHARACTERISTICS
throwing out from the openings in the iron
Power requirements: 230 ~ 50 Hz
sole (8).
Maximal power consumption: 2200 W
• Slightly sway the iron back and forth, until
water goes out of the water tank (11).
Specifications subject to change without
• Place the iron on the base (14) and let it
prior notice.
cool down completely.
• When the sole (8) cools down completely,
Service life of appliance - 3 years
wipe it with a dry cloth.
• Before you take the iron for storing, make
GUARANTEE
sure that there is no water in the water tank
Details regarding guarantee conditions can
(11) and that the iron sole (8) is completely
be obtained from the dealer from whom the
dry.
appliance was purchased. The bill of sale or
receipt must be produced when making any
CLEAN AND CARE
claim under the terms of this guarantee.
• Before cleaning the iron, make sure that it
is turned off and has cooled completely.
This product conforms to the EMC-
• Wipe the iron's outer surface with a damp
Requirements as laid down by the
cloth and then wipe dry.
Council Directive 89/336/EEC
• Sediment on the iron sole can be removed
and to the Law Voltage Regulation
with a cloth soaked in vinegar-water solu-
(73/23 EEC)
tion.
7
1259.indd 71259.indd 7 16.07.2010 17:15:3816.07.2010 17:15:38
Оглавление
- ENGLISH
- ENGLISH
- ENGLISH
- ENGLISH
- DEUTSCH
- DEUTSCH
- DEUTSCH
- DEUTSCH
- DEUTSCH
- РУССКИЙ
- РУССКИЙ
- РУССКИЙ
- РУССКИЙ
- РУССКИЙ
- ҚАЗАҚ
- ҚАЗАҚ
- ҚАЗАҚ
- ҚАЗАҚ
- ҚАЗАҚ
- ROMÂNĂ
- ROMÂNĂ
- ROMÂNĂ
- ROMÂNĂ
- ROMÂNĂ
- ČESKÝ
- ČESKÝ
- ČESKÝ
- ČESKÝ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- БЕЛАРУСКI
- БЕЛАРУСКI
- БЕЛАРУСКI
- БЕЛАРУСКI
- БЕЛАРУСКI
- ЎЗБЕК
- ЎЗБЕК
- ЎЗБЕК
- ЎЗБЕК
- ЎЗБЕК