AEG BSS 4808: English

English

49

3. Now select AUX mode with the FUNCTION button

current folder (e.g. 01), the current song (e.g. 005), and

(19 on the device) or with the AUX/BT button (3 on the

the elapsed play time are shown in the display.

remote).

For operation, please refer to the section “Play CDs/MP3”.

4. You will hear the sound playback through the speakers.

Always keep the cover closed when not using it.

You can adjust the volume with the VOLUME control (3)

CAUTION:

or the VOLUME +/- buttons (10 on the remote). The CD

buttons are not active.

Before you remove the memory card, switch the device to

5. For further functions please refer to the user manual of

Radio operation.

theexternalaudiodevice.

Press on the end of the memory card to remove it again.

NOTE:

Setthevolumeoftheexternaldevicetoaproperaudible

Listening to the radio

level.

Searching for stations

Always keep the cover closed when not in use.

1. Repeatedly press FUNCTION button (19 on the device)

until the display shows “TUNER”. Or press the FM button

USB port (13)

(2) on the remote control.

This device has been developed in line with the latest techni-

2. Use the

/ buttons (9/8) to tune in the desired station.

cal advances in the USB field. The wide range of different

3. The FM.ST control lamp ((ST)) (in the display) will light up

USB storage devices of all types which are currently on the

when the selected station is received with stereo quality.

market, unfortunately do not allow us to guarantee full com-

Ifreceptionistoopoorandthestationexperiencesstatic,

patibility with all USB storage devices. For this reason, in rare

the control lamp will flicker. Try to improve the reception

cases there may be problems in playing back files from USB

by changing the position of the telescopic antenna. For

storage devices. This is not a malfunction of the device.

FM stations you may use STOP / FM MONO/ST button

1. Flip open the cover.

(9 on the remote) to switch between MONO and STE-

2. Press the FUNCTION button (19 on the device) or the (16

REO reception. In case of poor reception we recommend

on the remote) until “USB” appears in the display.

switching to MONO mode.

3. Directly connect a USB storage medium to the respec-

tive port. READING appears on the display. After a few

Saving/Selecting Stations

seconds, the total number of folders and the title will be

4. When you have found the desired station, press the

shown for a short time. Playback then begins. The cur-

PROG button (10/4). MEMORY will light up in the display

rent folder (e.g. 01), the current song (e.g. 005), and the

and the memory position will flash.

elapsed play time will be shown in the display.

5. To select the programming channel, press the PRESET

button (5 on the remote).

NOTE:

6. Press PROG to save the settings.

• Alwaysdirectly connect a USB storage medium to

the USB port to prevent any malfunctions.

To chose a stored channel, press the PRESET button (5 on the

• TheUSBconnectionisnot suitable for charging

remote).

externaldevices.

Playing CDs/MP3

For the operation, please follow the section “Play CDs/MP3”.

Always keep the cover closed when not using it.

This is how to play a CD

CAUTION:

1. Repeatedly press FUNCTION button (19 on the device)

until the display shows “CD”. Or press the CD/USB/SD

Before you remove the USB memory medium, switch the

button (16) on the remote control.

device to Radio operation.

2. Pull the CD compartment (1) upwards on the handle (2) in

order to open it.

Memory card slot (11)

3. Insert the audio CD onto the conical spindle with the

1. Flip open the cover.

label facing upwards, so that it snaps into place mechani-

2. Press the FUNCTION button (19 on the device) or the

cally. Then close the CD compartment cover again.

CD/USB/SD button (16 on the remote) until “CARD”

4. AUDIO CD:

shows in the display.

“READING” briefly appears on the display, then “Cd”,

3. Insert the memory card into the intended opening until it

the number of titles and total playback time. The play-

audibly locks in with a “click”. Thereby the contacts need

back starts from the first title on the CD. The current

to point downward. READING appears on the display.

song, the elapsed playback time and the “Cd” symbol

After a few seconds, the total number of folders and titles

are displayed.

will be shown for a short time. Playback then begins. The