Vitek VT-3525: ENGLISH

ENGLISH

Activation of the Switch Off By Timer

simply press the Power On/Off / Alarm

function

On/Off button (14).

When radio is on, press the Alarm Tempo-

rary Switch Off/ Switch Off By Timer but-

Using radio

ton (16). The display will show “Switching

- Press the Power On/Off button (14) to

off by timer 90”, and with each pressing

turn the radio on.

on the button (16) the 90-minute timer in-

- Select the AM or FM broadcast with

dication will be decreased by 2 minutes.

the band switch (2).

Figure 4.

- Select the station using the setting

NOTE: Press the Power On/Off button

wheel (8)

(14) to disable the function of delayed

- Using the volume control buttons (3)/

switch off.

(4) set the desired volume level.

Press the Power On/Off button (14) to

Alarm Temporary Switch Off func-

turn the radio off.

tion:

1. Press the Alarm Temporary Switch Off/

NOTE:

Switch Off By Timer button (16), to

- For receiving AM broadcast, an inter-

temporary deactivate the alarm signal

nal directional antenna is used. To ob-

while it is on; the sound signal or radio

tain better reception, rotate the radio.

will be switched off.

- Make sure that the FM antenna cord

2. The alarm temporary deactivation lasts

(7) is fully extended and directed for

for 9 minutes.

the best reception of FM signal.

Connecting the sound signal source

Reset

1. Using the connection cable (not in-

The Reset button (17) is located at the

cluded), connect the sound signal

device bottom. Press on it using the ball-

source to the main device.

point pen when replacing the battery or

2. Adjust the sound volume of the source,

when the device does not function cor-

to obtain better amplification.

rectly. All setting will be reset to the de-

fault values and all memorized data will

NOTE: Do not set the sound volume too

be lost (alarm and time settings).

high, to avoid overloading. When a sound

signal source is connected to the audio

Attention

input jack (15), the sound issued by the

- No naked flame sources, such as

device itself will be off. The device sound

lighted candles, should be placed on

will switch on again as soon as the con-

the apparatus.

nection cable is removed from the audio

- Do not put the device into closed

input jack.

bookcases or shelves without suffi-

cient ventilation.

When the Sound Source function is acti-

To prevent fire or electric shock haz-

vated, the alarm sound will turn on at the

ard, do not expose the device to mois-

set time and will sound together with the

ture or water.

music. To deactivate the alarm sound,

- Do not expose the device to direct

8

3525.indd 83525.indd 8 26.07.2006 11:45:0926.07.2006 11:45:09