Vitek VT-1666: ENGLISH

ENGLISH: Vitek VT-1666

ENGLISH

CLEAN AND CARE

• Use a damp cloth to clean external sur-

Before cleaning switch off the unit and

faces.

unplug it.

Keep the door clean. Provide that no

Protect the control panel from water.

crumbs accumulate between the door

Wipe the panel with a soft, slightly damp

and the panel as it prevents the door

cloth.

from closing.

Keep the chamber clean. If there are

Clean ventilation openings on the body

remaining of the products on the walls

of the oven from dust and dirt.

of the unit remove them using a damp

Regularly clean the glass tray and its

cloth.

support; wipe the bottom of the working

If the working chamber is dirty use a soft

chamber.

detergent.

Wash the glass tray and draft with a neu-

Do not use abrasives, wire brushes to

tral soapy solution. You can wash them in

clean the unit inside and outside.

a dish wash machine.

Provide that no detergent gets into the air

Do not immerse the heated glass tray

and steam openings on the door of the

into cold water: due to sudden tempera-

unit.

ture drop the glass tray can splinter.

Do not use detergent based on ammo-

nia.

Problems and their solutions

Normal operation

During operation of the unit interferences in the recep-

The unit makes Interferences

tion of TV and radio signals can appear. The same in-

in the reception of TV and radio

terferences appear during operation of small electrical

signals

appliances such as a mixer, a vacuum cleaner and a

hair dryer. It is normal.

If the microwave radiation level is low, the brightness of

Low brightness of the backlight

the chamber backlight can be low as well. It is normal.

During cooking, steam can evaporate from the prod-

Steam accumulation on the

ucts. Great amount of steam evaporates via the ventila-

door, hot air output from the

tion openings but some part can accumulate on the

ventilation openings.

door. It is normal.

Troubleshooting

Problem Possible cause Solution

Pull the plug out of the

The power cable plug is

socket. After10 seconds

not properly inserted in the

insert the plug into the

socket.

The unit does not switch on

socket again.

Try to connect another

Problem with the socket

appliance to the same

socket

The door is not firmly

No heating

Firmly close the door

closed

11

1666.indd 111666.indd 11 24.06.2008 12:46:2924.06.2008 12:46:29