Vitek VT-1666: ENGLISH

ENGLISH

21. Auto cooking mode indication

- The power cable of the extension cord

22. Timer indication

should not hang over the edges of the

23. Standby mode indication

table, where children can pull it and it

24. Digital information/current time indica-

should not be in a passing way.

tion

25. Grille mode indication

SETTING

26. Current time indication

• Before switching on the unit, make sure

27. Lockout mode indication

that the voltage in your home socket cor-

28. Power level indication

responds to the voltage specified on the

29. Product weight indication

unit.

30. 60%, 40% and 20% power operation in-

• Make sure that all packing materials are

dication

removed from the oven chamber.

31. Combination mode 2 indication

• Do not remove a light-gray mica base in-

32. 100% and 80% power operation indica-

side the chamber in the place of micro-

tion

waves output (4), as it serves to protect

33. Combination mode 1 indication

the magnetron.

34. Microwave mode indication

ATTENTION! Make sure that the unit

35. Defrost mode indication

does not have damages such as: bent or

broken door, broken or loose hinges and

TIPS ON GROUNDING OF THE

latches, dimples inside the oven or on

MICROWAVE OVEN

the door. With the existence of any of the

The unit should be securely grounded. In

damages, usage of the unit is prohibited.

case of any short circuit grounding reduces

• Set the unit on the flat stable surface that

risk of getting electric shock, because cur-

will bear its weight and max. weight of the

rent will pass via a ground wire. A power

products, which will be cooked in it. Place

cord with a grounding wire and the plug

the unit out of the reach of children.

with a grounding contact are used in the

• Do not place the unit in places with high

unit. The plug should be connected to the

moisture and temperature, and near in-

outlet that should always have a grounding

flammable objects.

contact.

• Proper ventilation is needed for normal

WARNING: usage of the plug with a

operation of the unit. Set the oven leaving

grounding contact connected with the out-

at least 7-8 cm of space behind and on

let without grounding can lead to the risk of

the sides of the oven and 30 cm of space

electric shock. Consult a qualified electri-

above the oven.

cian, if you do not understand the instruc-

Do not block ventilation openings on the

tions on grounding or if you are not sure

microwave oven case. Do not remove

that the unit is securely grounded.

supporting legs from the bottom of the

To prevent tangling of the power cable the

oven.

unit is equipped with a short power cable.

• Do not use the unit without the glass tray

If you need an extension cord use only a 3-

and the roller ring.

wired extension cord with a grounding con-

• Make sure that the power cable does not

tact on the plug and the socket.

have any damages and does not pass

- Marking of the cord wire section of the

below the unit or through any hot or sharp

microwave oven and on the cable of the

objects.

extension cord should match.

- There should be a grounding wire in the

Microwave oven assembly

extension cord.

Remove the package and the accessories

6

1666.indd 61666.indd 6 24.06.2008 12:46:2924.06.2008 12:46:29