Vitek VT-1666: ENGLISH

ENGLISH

from the operating chamber. Check the

turning the handle you will hear sound sig-

oven whether there is deformation or not.

nals.

Pay special attention to the door state. If

After the cooking is finished you will hear 4

there is some problem do not set and do

sound signals and in every two minutes you

not switch on the oven.

will hear repeated sound signals reminding

you to open the door of the microwave oven

Protective covering

and take out the product.

Case: If there is protective covering, re-

move it from the surface.

Setting current time

Do not remove light grey mica plate in-

Insert the power plug into the socket, you

side the operating chamber; it serves

will hear a sound signal, “1:01” will appear

to protect the magnetron.

on the display. Press the “clock” button

once or twice, to select 12-hour or 24-hour

Setting the glass tray

format.

1. Set the rotating socket (6) in the open-

Example: to set current time 8 hours 30

ing situated on the bottom of the operat-

minutes.

ing chamber.

1. Press the “сlock” button once.

2. Set the roller ring (7) on the bottom of

2. Turn the “time/menu” knob clockwise,

the chamber.

and set hours - 8.

3. Carefully set glass tray (3) on the roller

3. Press the “сlock” button to confirm.

ring (7), by matching ledges and grooves

4. Turn the “time/menu” knob clockwise

of the support (6).

and set minutes - 30, 8:30 will be dis-

Never set the glass tray with its bottom

played.

upside down.

5. Press the “сlock” button to confirm.

• Do not prevent rotation of the glass tray

The preset time will be displayed, the (26)

while operating the oven.

indication will appear on the display, and

• During cooking always use glass tray

the dots (20) will be flashing.

and tray support.

• Products and cookware should be al-

Note: if time setting is not finished, then

ways set only on the glass tray.

in about 30 seconds a sound signal will

• The glass tray can rotate clockwise/anti

be heard and display information will

clockwise. It is normal.

reset to default settings.

• If cracks or chops appear, stop using

During cooking of products to display

the unit immediately or replace the glass

the current time press the “Clock” but-

tray.

ton the current time will be displayed dur-

ing 5 seconds.

OPERATION

• Before switching on the unit, make sure

Cooking in a microwave oven

that the voltage in your home socket

To switch the microwave cooking mode,

corresponds to the voltage specified on

press the “Power” button for several times

the unit.

to set the required power level and then by

• Put the products inside the working

turning the “Menu/Time” knob clockwise

chamber and close the door.

set the required cooking time.

Max. Cooking time is 60 minutes.

Sound signal

Pressing buttons on the control panel or

7

1666.indd 71666.indd 7 24.06.2008 12:46:2924.06.2008 12:46:29