Vitek VT-1462: ENGLISH

ENGLISH

the blender, and turn counter-clockwise

SPECIFICATIONS

until click (fig. A).

Power requirements: 220-230 V, ~50-60 Hz

3. Insert the plug into wall outlet. The blender

Max. power: 250 W

is ready for operation.

Safety Class: II

4. Put the attachment into the products you

Intervals: 1 min. operation/ 10 min. break.

intend to process and press On/Off Button

(2) (fig. C).

The manufacturer reserves the right to

5. After the use, unplug the unit, turn the

change the characteristics of the device

attachment clockwise and remove (fig. B).

without prior warning.

You may use the hand blender with the Scaled

Service life of the unit not less than 3

Cup or any other utensils holding the pre-

years

pared products.

GUARANTEE

ATTENTION: NEVER OPERATE THE HAND

Details regarding guarantee conditions can

BLENDER, IF YOU ARE SIMULTANEOUSLY

be obtained from the dealer from whom the

PREPARING THE PRODUCT.

appliance was purchased. The bill of sale or

receipt must be produced when making any

Intervals

claim under the terms of this guarantee.

Do not run the unit for more than 1 minute at

a time, then let the motor cool for about 10

This product conforms to the

minutes.

EMC-Requirements as laid down

by the Council Directive

Cleaning

89/336/EEC and to the Law

Unplug the unit before cleaning.

Voltage Regulation (73/23 EEC)

1. Remove the attachment.

2. Wash the attachment and the scaled cup

in warm, soapy water, then rinse and allow

to dry.

3. Wipe the main body of blender with damp

cloth.

Operation Tips

Discoloration of plastic parts may occur after

processing foods with strong color pigments

(carrots, beet, etc.).

Use cloth soaked in cooking oil to remove any

such spots.

Troubleshooting

If the blender does not operate:

- Make sure the plug is inserted into the wall

outlet. Check the outlet for voltage by con-

necting any other appliance.

In case of any faults, refer to the authorized

service center.

2