Pioneer DJM-2000: Changing the settings

Changing the settings

24

1 Press [LIVE SAMPLER (UTILITY, WAKE UP)] for at least 1

seconds.

The [USER SETUP] screen appears.

The [LIVE SAMPLER (UTILITY, WAKE UP)] indicator flashes.

! To display the [CLUB SETUP] screen, first turn this unit’s power off, then press

[POWER] while pressing [LIVE SAMPLER (UTILITY, WAKE UP)].

2 Press the setup item button.

The selection items appear.

3 Select the setup item.

Select the item on the touch panel and enter it.

4 Change the item’s setting.

Select the item on the touch panel and enter it.

! Press [SAVE] to save the changes to the [CLUB SETUP] screen.

5 Press [EXIT].

The [USER SETUP] screen closes.

! To close the [CLUB SETUP] screen, press [POWER] to turn this unit’s power

1

Setup item button

off.

Setting preferences

Settings indicated in italics are the default settings set upon purchase.

Mode Options settings Selection item 1 Selection item 2 Selection item 3 Descriptions

TOGGLE

1

BUTTON ACTION

Select the MIDI signal sending method, [TOGGLE] or [TRIGGER].

ZONE1

TRIGGER

MIDI CHANNEL

1, 2, to 16 Sets the MIDI channel.

TOGGLE

MIDI

BUTTON ACTION

Select the MIDI signal sending method, [TOGGLE] or [TRIGGER].

TRIGGER

2

ZONE2

MIDI CHANNEL

1, 2, to 16 Sets the MIDI channel.

USER SETUP

Restores the [TYPE A] – [TYPE D] MIDI settings to the default values.

RESET

—

[RESET] function is unique to [ZONE2].

Turns the fader start function of the DJ players connected to the

LINK

CH1 to CH4 ON, OFF

[LINK] terminals on and off.

FADER START

Turns the fader start function of the DJ players connected to the

CONTROL

CH2, CH3 ON, OFF

[CONTROL] terminals on and off.

LCD BACK LIGHT

1, 2, 3, 4, 5 — Adjusts the touch panel’s brightness.

VERSION No.

— — — Displays the DJM-2000’s software version.

DIGITAL OUT MAX

–19 dB, –15 dB, –10 dB,

Adjusts the maximum audio level output from the [DIGITAL OUT]

—

LEVEL

–5 dB

terminal.

SYSTEM

DIGITAL SAMPLING

48 kHz, 96 kHz — Switches the digital signal sampling rate.

RATE

AUTO STANDBY

ON, OFF — Turns the auto standby function on and off.

OUTPUT TO BOOTH

Sets whether or not to output the microphone’s audio signals from

ON, OFF —

MONITOR

[BOOTH] terminals.

CLUB SETUP

Sets the talkover sensitivity. The talkover function is activated when

TALK OVER THRESH-

–25 dB, –20 dB, –15 dB,

MIC

—

a sound with a volume above the set volume is input to the micro-

OLD LEVEL

–10 dB

phone.

–25 dB, –20 dB, –15 dB,

Sets the attenuation level for the sound other than the microphone’s

TALK OVER LEVEL

—

–10 dB

sound when the talkover function is activated.

TOUCH PANEL

— — — The touch panel’s calibration is adjusted by pressing [+] in order.

FACTORY RESET

YES, NO — — Restores all the settings to their factory defaults.

1 Changes the MIDI settings of the buttons on the control panel, [FREQUENCY MIX] and [SIDECHAIN REMIX].

2 Changes the MIDI settings for [TYPE A] to [TYPE D] on the MIDI control screen.

About the auto standby function

When [AUTO STANDBY] is set to [ON], the standby mode is set automatically if 4 hours pass with all of the conditions below met.

— That none of this unit’s buttons or controls are operated.

— That no audio signals of –10 dB or greater are input to this unit’s input terminals.

— That no PRO DJ LINK connections are made.

! The standby mode is canceled when [LIVE SAMPLER (UTILITY, WAKE UP)] is pressed.