Vitek VT-1251: ENGLISH

ENGLISH: Vitek VT-1251

ENGLISH

set after some time depending on the po-

Do not use abrasive substances to clean

sition of the temperature regulator (13).

the sole and body of the iron.

Avoid touching the iron sole with sharp

STEAM CHAMBER CLEANING

metal objects.

To prolong lifetime of the iron we recommend

cleaning the steam chamber, especially in

STORAGE

the regions with “hard” water.

Turn the temperature regulator (13) anti-

clockwise till MIN position, set the steam

Fill the water tank (12) till the MAX mark

release regulator (3) to the left position -

(14).

steam release OFF position.

Put the iron on the base (11).

Remove the power plug from the outlet.

Insert the power plug into the outlet.

Open the water tank lid (2), turn over the

Set the temperature regulator (13) to the

iron and drain any remaining water from

MAX temperature: “max” the (7) indicator

the water tank (12) (pic. 8).

will light up (Pic.3).

Close the lid (2).

When the sole temperature (17) reaches

Set the iron vertically and allow it to cool

the desired temperature value, the (7) indi-

completely.

cator will go out, you can start cleaning of

• Store the iron vertically.

the iron chamber.

Unplug the iron, set the temperature regu-

Delivery set

lator (13) to the «MIN» position.

1. Iron – 1 pc.

Pull the plug out of the socket.

2. Water bowl – 1pc.

Hold the iron above the sink horizontally,

and hold the SELF CLEAN button (15)

TECHNICAL CHARACTERISTICS

(pic.7).

Power requirements: 240 V ~ 50 Hz

Boiling water together with scale will be

Power consumption: 2000 W

throwing out from the openings in the iron

sole (17).

Specifications subject to change without

Slightly sway the iron back and forth, until

prior notice.

water goes out of the water tank (12).

Place the iron on the base (11) and let it

MINIMUM SERVICE LIFE - 3 YEARS

cool down completely.

When the sole (17) cools down completely,

GUARANTEE

wipe it with a dry cloth.

Details regarding guarantee conditions can

Before you take the iron for storing, make

be obtained from the dealer from whom the

sure that there is no water in the water tank

appliance was purchased. The bill of sale or

(12) and that the iron sole (17) is complete-

receipt must be produced when making any

ly dry.

claim under the terms of this guarantee.

CARE AND CLEANING

This product conforms to the EMC-

Before cleaning the iron, make sure that it

Requirements as laid down by the

is turned off and has cooled completely.

Council Directive 89/336/EEC

Wipe the iron's outer surface with a damp

and to the Law Voltage Regulation

cloth and then wipe dry.

(73/23 EEC)

Sediment on the iron sole can be removed

with a cloth soaked in vinegar-water solu-

tion.

After removing sediment, polish the sole

with a dry cloth.

7

1251.indd 71251.indd 7 02.06.2008 12:01:2902.06.2008 12:01:29