Vitek VT-1251: ENGLISH
ENGLISH: Vitek VT-1251
ENGLISH
DRY IRONING
ly supplied, check whether the temperature
• Place the iron on the base (11).
regulator (13) is set properly.
• Insert the power plug into the outlet.
• Set the temperature regulator (13) to the
ADDITIONAL STEAM RELEASE
required ironing temperature: “•”, “••”,
Additional steam release function is use-
“•••” or “max” (depending on the type
ful when ironing folds and can only be used
of fabric), the (7) indicator will light up
at high ironing temperatures (when the iron
(Pic.3).
temperature regulator (13) is set to “•••” or
• When the sole temperature (17) reaches
“max”).
the desired temperature value, the (7) indi-
• When the additional steam release button
cator will go out, you can start ironing.
(6) is pressed, steam will be vigorously re-
• After you finish ironing set the (13) regula-
leased from the openings in the iron sole
tor to the “min” position.
(pic.5).
• Pull the plug out of the socket and let the
iron cool down completely.
Note: In order to avoid leakage of water
from steam openings, press the addition-
STEAM IRONING
al steam supply button (6) with 4-5 sec.
For steam ironing set the temperature regu-
interval.
lator to «•••» or «МАХ». The iron has an
anti-drop valve, which stops water supply,
VERTICAL STEAMING
when the sole temperature is too low it pre-
For vertical steaming can be used only when
vents the appearance of drops out of the sole
the high temperature mode is used (set
openings (17). While heating or cooling down
the temperature regulator (13) to «•••» or
of the sole (17), you will hear clicks of open-
«МАХ»).
ing/closing of the anti-drop valve it means
• Hold the iron vertically at the distance 15-
that the valve works normally.
30 cm from the clothes press the addition-
• Place the iron on the base (11).
al steam release button (6), steam will be
• Insert the power plug into the outlet.
released from the openings in the iron sole
• Make sure that there is enough water in the
(17) (pic. 6).
water tank (12).
• Set the temperature regulator (13) to the
Important information
required ironing temperature: “•••” or
• Vertical steaming is not recommended for
“max” (depending on the type of fabric),
synthetic fabrics.
the (7) indicator will light up (Pic.3).
• To avoid melting the fabric, do not touch
• When the sole temperature (17) reaches
the iron sole to the item while steaming.
the desired temperature value, the (7) indi-
• Never steam iron clothing that is being
cator will go out, you can start ironing.
worn as the steam temperature is very high
• Turn the steam supply regulator (3) to set
and it can cause burns. Use a coat-hanger
the intensity of steaming, steam will start
or a stand.
outgoing from the openings of the sole
(17).
AUTO-SWITCH OFF FUNCTION
• After you finish ironing set the (13) regula-
If the iron is about 30 seconds in the horizon-
tor to the “min” position and the steam
tal position or about 8 minutes in the vertical
supply regulator (3) to the left position.
position it will switch off automatically. The
• Pull the plug out of the socket and let the
(8) indicator will be flashing.
iron cool down completely.
To switch on the iron, just start ironing.
ATTENTION!
Note: After switching off of the iron the
If during the operation steam is not constant-
preset temperature of the iron sole will be
6
1251.indd 61251.indd 6 02.06.2008 12:01:2902.06.2008 12:01:29
Оглавление
- ENGLISH
- ENGLISH
- ENGLISH
- ENGLISH
- DEUTSCH
- DEUTSCH
- DEUTSCH
- DEUTSCH
- DEUTSCH
- DEUTSCH
- РУССКИЙ
- РУССКИЙ
- РУССКИЙ
- РУССКИЙ
- РУССКИЙ
- ҚАЗАҚ
- ҚАЗАҚ
- ҚАЗАҚ
- ҚАЗАҚ
- ҚАЗАҚ
- POLSKI
- POLSKI
- POLSKI
- POLSKI
- POLSKI
- ČESKÝ
- ČESKÝ
- ČESKÝ
- ČESKÝ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- БЕЛАРУСКI
- БЕЛАРУСКI
- БЕЛАРУСКI
- БЕЛАРУСКI
- БЕЛАРУСКI
- ЎЗБЕК
- ЎЗБЕК
- ЎЗБЕК
- ЎЗБЕК
- ЎЗБЕК