Vitek VT-1215 VT: ENGLISH РУССКИЙ

ENGLISH РУССКИЙ

HINTS FOR IRONING

Примечание:

На ярлыке означает: изделие нельзя гладить!

(например, эластик)

1. Sort out the articles to be ironed according to the type of fabric.

This will minimize the frequency of temperature adjustment for dif&

позиция

ferent garments.

ярлык

вид ткани

волокно

терморегулятора

2. Test ironing a small area on the backside or inside the garment if

you are unsure about the type of fabric. Start with a low tempera&

ture and increase gradually.

акрил

полипропилен

3. Wait for about three minutes before ironing heat sensitive fabrics.

полиэтан

Temperature adjustment needs certain time to reach the required

синтетика

level no matter it is higher or lower.

4. Delicate fabrics such as silk, wool, velour, etc. are best ironed with

an ironing cloth to prevent shine marks.

5. You may need a few times of press to activate the spray, burst and

синтетика

vertically burst function.

ацетатволокно

триацетат

HOW TO FILL WATER

1. Disconnect the iron from mains supply

с люрексом

outlet.

полиамид

2. Move the Steam Control/Self&Cleaning

(нейлон)

синтетика

Knob to position:

полиэстер

вискоза

3. Fill water through the water inlet hole.

(See figure 2)

FIGURE 2

шелк

4. Fill up to the 'Max' level marked on the

шелк

side of water tank.

Note:

For best result, it is advisable to use demineralised water or distilled

шерсть

шерсть

water. Do not use chemically descaled water or any other liquids.

FIRST TIME IRONING

1. Remove any protective films or stickers from the sole plate and the

cabinet.

хлопок

хлопок

2. Unwind and straighten the power cord.

3. Fill the water tank with demineralised water or distilled water.

лен лен

(See How To Fill Water)

4. Connect the iron to a suitable mains supply outlet.

5. Turn the Temperature Dial in clockwise direction to maximum posi&

4

17