Vitek VT-1214: ENGLISH РУССКИЙ

ENGLISH РУССКИЙ

HOW TO FILL WATER

Примечание:

На ярлыке означает: изделие нельзя гладить!

(например, эластик)

1. Disconnect the iron from mains supply

outlet.

позиция

2. Move the Steam Control/Self&Cleaning

ярлык

вид ткани

волокно

терморегулятора

Knob to position:

3. Release the Water Inlet Cover.

4. Fill water through the water inlet hole.

акрил

полипропилен

(See figure 2)

FIGURE 2

полиэтан

4. Fill up to the 'Max' level marked on the

синтетика

side of water tank.

Note:

For best result, it is advisable to use demineralised water or distilled

water. Do not use chemically descaled water or any other liquids.

синтетика

ацетатволокно

триацетат

HOW TO SET TEMPERATURE

1. Connect the iron to a suitable mains supply outlet.

2. The LCD light up for a second and one beep can be heard.

с люрексом

3. "STANDBY" will flash on the LCD.

полиамид

4. To adjust the temperature settings depress the control button a beep

(нейлон)

синтетика

will be audible every time the control button is pressed.

полиэстер

вискоза

5.The temperature setting will cycle "MAX & •••(3dot) & ••(2dot) & •

(1dot) ……etc." and will indicate on the LCD Display:

шелк

шелк

шерсть

шерсть

6. The "STANDBY" will flash to indicate the iron is heating up or cooling

down. The "STANDBY" will flash at the time of ironing, this is perfectly

normal as it shows the iron maintain the heat setting you have chosen.

хлопок

хлопок

7. When the required temperature is reached; the "STANDBY" will be

gone and beep twice.

лен лен

8. The iron is ready for use.

4

17