Pioneer PD-30-S: Using advanced functions

Using advanced functions 05

English

DeutschFrançais

Italiano Español Русский

Nederlands

11

En

PURE AUDIO

PD-30_PWSYXZT8.book 11 ページ ２０１２年５月７日　月曜日　午前１１時３３分

Chapter 5:

Playback functions

Using advanced functions

The functions that can be used differ according to the type of disc and file. In some cases, some of the functions

cannot be used. Check the usable functions on the table below.

The functions that can be used differ according to the

1 Press the

SACD/CD

button.

Disc/file type

type of disc and file. In some cases, some of the

Input changes to SACD/CD.

functions cannot be used. See Playback functions on the

Function

1

SACD CD-DA

WMA

right column.

DSD

4

2 In the stop mode, press the SACD/CD

CD-R/-RW

2

MP3

AAC

3

button.

Each time the button is pressed, the playback alternates

Fast forward/Fast reverse



Playing with high-fidelity sound

between the CD area and SACD 2 channel area.

Skip function



Note

Sound Retriever

Direct search

 ––

(designate a specific track for playback)

When compressed sound signals are decompressed for

• This unit does not support SACD multi-channel

playback, some parts experience dropouts. By setting

areas.

Repeat playback



the sound retriever function to ON, compensation is

added for those losses, thus producing richer, more

Random playback



sumptuous sound.

Adjusting overall display illumination

Programmed playback

 ––

• Press the S.RETRIEVER button.

This unit is equipped with a dimmer function to allow the

(Play tracks in a predetermined order)

Each time the button is pressed, the function

display illumination to be adjusted in three levels,

View disc data



will change as follows: S.RTRV: OFF  S.RTRV: LOW 

responding to differing levels of ambient lighting. The

S.RTRV: HI  Returns to original status

factory default is the brightest setting.

Sound Retriever

–– –

• The sound retriever function is disabled when the

Pure Audio





• Press the

DIMMER

button.



5

pure audio function is ON.

Each time the button is pressed it the brightness

SACD/CD



6

–––

cycles through the three levels.

Pure Audio

• The dimmer setting cannot be changed when a

1 Some functions may not work for some discs or files, even if indicated [] on the table.

This function disables digital audio output and plays

disc is playing with the pure audio function ON (see

2 Also see Playback of CD-R/CD-RW discs on page 12.

analog audio with high fidelity. When set to ON, the

at left).

3 • AAC files can be played back only on the PD-30.

display shows no indicators. The factory default

• The brightness of the STANDBY indicator does not

• Also see Playable file formats on page 12.

condition is OFF.

change.

4 Also see Playing DSD discs on page 12.

5 This function is enabled only during playback of files recorded on disc.

• Press the PURE AUDIO button.

6 Hybrid SACD discs only.

Press again to turn the function OFF.

• When this function is set to ON and the main unit’s

Auto power down (automatically sets

input is switched to SACD/CD, the PURE AUDIO

indicator will light on the front panel. During disc

power to standby)

playback, the front panel display turns OFF.

This function automatically switches the unit to standby

• When the PURE AUDIO indicator is lighted, any

mode if no signal or switch operation is detected for 30

iPod/iPhone/iPad connected to the main unit will

minutes.

not be recharged.

SET UP

1 Press the

SET UP

button.

2 Change the setting and confirm.

Changing the playback area (layer) of

Use the / button to set the function ON

or OFF as desired, then press the ENTER

an SACD/CD

ENTER

button to confirm.

Hybrid SACD discs are composed of two layers, an

SACD layer, and CD layer, allowing you to select which

Note

layer you wish to play.

• This function is disabled when iPod input is

selected.