AEG TS 55 E 419290: English

17

English

GB

SpEcIfIED conDItIonS of uSE

The plungecut circular saw can be used for sawing solid wood, 

bonded wood, glued veneer, materials similar to wood, plaster and 

cement-bonded fibre materials, aluminium profiles, Non-ferrous 

metals and plastics.

Do not use this product in any other way as stated for normal use.

Ec-DEclaratIon of conformIty

We declare under our sole responsibility that this product is in 

conformity with the following standards or standardized documents. 

EN 60745, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3,  

in accordance with the regulations 2006/42/EC, 2004/108/EC

Rainer Kumpf

Manager Product Development 

Authorized to compile the technical file

Winnenden, 2010-10-25

maInS connEctIon

Connect only to single-phase AC current and only to the 

system voltage indicated on the rating plate. It is also possible 

to connect to sockets without an earthing contact as the design 

conforms to safety class II.

maIntEnancE

The ventilation slots of the machine must be kept clear at all times. 

Clean only with dry cloth. Certain cleaning agents and solvents are 

harmful to plastics and other insulated parts. Keep the apparatus 

handle clean, dry and free of oil or grease. 

Use only AEG accessories and spare parts. Should components need to 

be replaced which have not been described, please contact one of our 

AEG service agents (see our list of guarantee/service addresses).

If needed, an exploded view of the tool can be ordered. Please state 

the Article No. as well as the machine type printed on the label 

and order the drawing at your local service agents or directly at: 

AEG Elektrowerkzeuge, Max-Eyth-Straße 10, D-71364 Winnenden, 

Germany.

SymBolS

Please read the instructions carefully before starting 

the machine.

CAUTION! WARNING! DANGER!

The dust produced when using this tool may be harmful 

to health. Do not inhale the dust. Wear a suitable dust 

protection mask.

Always wear goggles when using the machine.

Always disconnect the plug from the socket before 

carrying out any work on the machine.

Accessory - Not included in standard equipment, 

available as an accessory.

Solid wood (hard, soft), chipboards and hard fibre 

boards, laminated wood, blockboards, veneered and 

coated boards

Plastics, fibre-reinforced plastics paper and fabric acrylic 

glass

Plaster and cement-bonded fibre boards

Aluminium panels and profiles up to 15 mm

Do not dispose of electric tools together with household 

waste material! In observance of European Directive 

2002/96/EC on waste electrical and electronic 

equipment and its implementation in accordance with 

national law, electric tools that have reached the end of 

their life must be collected separately and returned to 

an environmentally compatible recycling facility.