AEG SRP 4342 CD-MP3: English

English

45

ID3 (6 on the remote)

Playback of music files in MP3 format

In case of a CD or file in the MP3 format:

Press the button to turn on the function. “ID3 ON” will show

This device allows the playback of music files in MP3 format.

in the display for a short time. In case of a stored ID-3 Tag in-

The device furthermore supports the common CD types: CD,

formation it will show up in the display as a continuing band.

CD-RW, and CD-R.

Press the button again to deactivate the function. “ID3 OFF”

Your device can play MP3 CDs. These are compressed CDs

will show in the display for a short time.

that can store up to 200 tracks. Your device automatically

recognizes MP3 discs (the display will show total number of

PROG (10/4)

tracks and folders). Please refer to chapter “Playing CD/MP3”

for playback of such CDs. You may program tracks as already

To save the stations and to set the programmed playback.

described under “Program playback”.

Program Playback

Please note:

Program playback in desired sequence.

There are many burning and compressing methods, as well

as differences in quality of CDs and burnt CDs.

1. Press

STOP button (7/9).

2. Press PROG button (10/4). The display will show “- - - -

Furthermore,themusicindustrydoesnotapplyxedstan-

PR:01” (“track” PR: “memory position”) and MEMORY.

dards (copy protection).

Use the / buttons (9/8) to select the desired track and

For that reason there might, in rare cases, occur problems

press PROG buttons again. The display will change to

when playing CDs and MP3 discs. That is not a malfunction

memory position P02.

of this device.

3. Use the

/ buttonstoselectthenexttrackandpress

PROG again. Repeat the steps until you have selected all

Cleaning and maintenance

tracks.

• Disconnectthemainsplugbeforecleaning.

NOTE:

• Youmaywipeoffexternalstains,usingaslightlydamp

If the memory capacity of the programmable title is

cloth without any additives.

reached, “FULL” will be displayed.

4. Press the

PLAY/PAUSE button (8/11). Playback starts.

Troubleshooting

The display will show the first selected track number.

5. Press STOP button once to stop playback. The memory

Symptoms Course Solution

will be kept.

CD can not be

CD is not inserted or

Ensure that the disc

6. For repeated playback of the programmes, press the

played back.

inserted incorrectly.

is inserted with the

PLAY/PAUSE button.

label facing upwards.

7. To delete memory, please press STOP button twice.

Batteries too weak. Insert new batteries

MEMORY will no longer be displayed.

or operate the device

with the mains lead.

The device will stop automatically after all stored tracks have

CD jumps dur-

Check the disc for

Check the disc for

been played. The program sequence will be kept in the

ing playback.

fingerprints, dirt or

fingerprints, dirt or

memory until you switch to another mode, remove the CD

scratches.

scratches.

from the compartment or switch off the device.

The unit does

The unit is blocked

Disconnect the mains

It is possible to combine program playback with the REPEAT

not work.

and “hangs”.

plugforapproxi-

function. After programming and starting playback, please

mately 5 seconds.

press REPEAT button (6/13) up to three times; the functions

Then switch the unit

can be applied as described under “REPEAT“.

back on.

Volume (3)

The PROG but-

Press any button to

and basses

ton (10/4) was held

release the lock of

(20) cannot be

pressed down until

the control.

adjusted on

the time display ap-

the device.

peared. Then one

of the controls was

pressed while the

time was displayed.