AEG SRP 4342 CD-MP3: English

English

43

1. Flip the cover downwards.

After a few seconds, the total number of folders and titles

2. Pleaseconnecttheexternaldevicevia3.5mmplugjack

will be shown for a short time. Playback then begins. The

to the AUX IN jack.

current folder (e.g. 01), the current song (e.g. 005), and

3. Now select AUX mode with the MODE button (19 on the

the elapsed play time are shown in the display.

device) or with the AUX IN button (3 on the remote).

For operation, please refer to the section “Play CDs/MP3”.

4. You will hear the sound playback through the speakers.

Always keep the cover closed when not using it.

You can adjust the volume with the VOLUME control (3)

CAUTION:

or the VOLUME +/- buttons (10 on the remote). The CD

buttons are not active.

Before you remove the memory card, switch the device to

5. For further functions please refer to the user manual of

Radio operation.

theexternalaudiodevice.

Press on the end of the memory card to remove it again.

NOTE:

Setthevolumeoftheexternaldevicetoaproperaudible

Listening to the radio

level.

Searching for stations

Always keep the cover closed when not in use.

1. Repeatedly press MODE button (19 on the device) until

the display shows “TUNER”. Or press the FM button (2)

USB port (13)

on the remote control.

This device has been developed in line with the latest techni-

2. Use the

/ buttons (9/8) to tune in the desired station.

cal advances in the USB field. The wide range of different

3. The FM.ST control lamp ((ST)) (in the display) will light up

USB storage devices of all types which are currently on the

when the selected station is received with stereo quality.

market, unfortunately do not allow us to guarantee full com-

Ifreceptionistoopoorandthestationexperiencesstatic,

patibility with all USB storage devices. For this reason, in rare

the control lamp will flicker. Try to improve the reception

cases there may be problems in playing back files from USB

by changing the position of the telescopic antenna. For

storage devices. This is not a malfunction of the device.

FM stations you may use STOP / FM MONO/ST button

1. Flip open the cover.

(9 on the remote) to switch between MONO and STE-

2. Press the MODE button (19 on the device) or the CD/

REO reception. In case of poor reception we recommend

USB/SD button (17 on the remote) until “USB” appears in

switching to MONO mode.

the display.

3. Directly connect a USB storage medium to the respec-

Saving/Selecting Stations

tive port. READING appears on the display. After a few

4. When you have found the desired station, press the

seconds, the total number of folders and the title will be

PROG button (10/4). MEMORY will light up in the display

shown for a short time. Playback then begins. The cur-

and the memory position will flash.

rent folder (e.g. 01), the current song (e.g. 005), and the

5. To select the programming channel, press the PRESET

elapsed play time will be shown in the display.

button (5 on the remote).

6. Press PROG to save the settings.

NOTE:

Always directly connect a USB storage medium to the

To chose a stored channel, press the PRESET button (5 on the

USB port to prevent any malfunctions.

remote).

For the operation, please follow the section “Play CDs/MP3”.

Playing CDs/MP3

Always keep the cover closed when not using it.

This is how to play a CD

CAUTION:

1. Repeatedly press MODE button (19 on the device) until

Before you remove the USB memory medium, switch the

the display shows “CD”. Or press the CD button (16) on

device to Radio operation.

the remote control.

2. Open the CD tray (1) by rotating the lock (2) to the left in

Memory card slot (11)

the OPEN direction.

1. Flip open the cover.

3. Insert the audio CD onto the conical spindle with the

2. Press the MODE button (19 on the device) or the CD/

label facing upwards, so that it snaps into place me-

USB/SD button (17 on the remote) until “CARD” shows

chanically. Then close the CD compartment cover again.

in the display.

Rotate the lock (2) to the right in the LOCK direction.

3. Insert the memory card into the intended opening until it

audibly locks in with a “click”. Thereby the contacts need

to point downward. READING appears on the display.