Vitek VT-1235: ENGLISH

ENGLISH

• Put the iron on the base (8).

release regulator (3) to the steam release

• Insert the power plug into the outlet.

OFF position.

• Set the temperature regulator (11) to the

• Remove the power plug from the outlet.

MAX. temperature: “max” the (9) indica-

• Open the water tank lid (2), turn over the

tor will light up.

iron and pour out any remaining water

• When the soleplate temperature (13)

from the water tank (10).

reaches the desired temperature point,

• Close the lid (2).

the (9) indicator will go out, you can start

• Set the iron vertically and allow it to cool

cleaning of the iron chamber.

completely.

• Unplug the iron, set the temperature reg-

• Keep the iron at dry cool place in vertical

ulator (11) to the «MIN» position.

position out of the reach of children.

• Pull the plug out of the socket.

• Hold the iron above the sink, press and

TECHNICAL CHARACTERISTICS

hold the button (14).

Power requirements: 220-240 V ~ 50 Hz

• Boiling water together with scale will be

Power consumption: 1850-2200 W

throwing out from the openings in the

iron soleplate (13).

Specifications subject to change without

• Slightly sway the iron back and forth, un-

prior notice.

til water goes out of the water tank (10).

• Place the iron on the base (8) and let it

MINIMUM SERVICE LIFE - 3 YEARS

cool down completely.

• When the soleplate (13) cools down com-

GUARANTEE

pletely, wipe it with a dry cloth.

Details regarding guarantee conditions can

• Before you take the iron for storing, make

be obtained from the dealer from whom

sure that there is no water in the water

the appliance was purchased. The bill of

tank (10) and that the iron soleplate (13)

sale or receipt must be produced when

is completely dry.

making any claim under the terms of this

guarantee.

CARE AND CLEANING

• Before cleaning the iron, make sure that it

This product conforms to the

is turned off and has cooled completely.

EMC-Requirements as laid down

• Wipe the iron's outer surface with a damp

by the Council Directive 89/336/

cloth and then wipe dry.

EEC and to the Law Voltage

• Sediment on the iron soleplate can be

Regulation (73/23 EEC)

removed with a cloth soaked in vinegar-

water solution.

• After removing sediment, polish the sole-

plate with a dry cloth.

• Do not use abrasive substances to clean

the soleplate and body of the iron.

• Avoid touching the iron soleplate with

sharp metal objects.

STORAGE

• Turn the temperature regulator (11) anti-

clockwise till MIN position, set the steam

7

VT-1235.indd 7VT-1235.indd 7 22.07.2009 17:35:2522.07.2009 17:35:25