Vitek VT-1253: ENGLISH

ENGLISH: Vitek VT-1253

ENGLISH

the iron sole to the item while steaming.

with a cloth soaked in vinegar-water solu-

Never steam iron clothing that is being worn

tion.

as the steam temperature is very high and

After removing sediment, polish the sole

it can cause burns. Use a coat-hanger or a

with a dry cloth.

stand.

Do not use abrasive substances to clean

the sole and body of the iron.

STEAM CHAMBER CLEANING

Avoid touching the iron sole with sharp met-

To prolong lifetime of the iron we recommend

al objects.

cleaning the steam chamber, especially in the

regions with “hard” water.

STORAGE

Set the steam supply regulator (3) to the off

Turn the temperature regulator (10) anti-

position.

clockwise till MIN position, set the steam

Fill the water tank (11) till the MAX mark

release regulator (3) to the steam OFF posi-

(13).

tion.

Put the iron on the base (8).

Remove the power plug from the outlet.

Insert the power plug into the outlet.

Open the water tank lid (2), turn over the

Set the temperature regulator (10) to the

iron and drain any remaining water from the

MAX. temperature, the (9) indicator will light

water tank (11) (pic. 8). Close the lid (2).

up (Pic.3).

• Set the iron vertically and allow it to cool

When the sole temperature (12) reaches the

completely.

desired temperature value, the (9) indicator

Store the iron vertically in a dry coo, place

will go out, you can start cleaning of the iron

out of the reach of children.

chamber.

Unplug the iron, set the temperature regu-

Delivery set

lator (10) to the MIN” position.

1. Iron – 1 pc.

Pull the plug out of the socket.

2. Water bowl – 1pc.

Hold the iron above the sink horizontally,

set and hold the regulator (3) in the SELF

TECHNICAL CHARACTERISTICS

CLEAN position (pic.7).

Power requirements: 230~ 50 Hz

Boiling water together with scale will be

Power consumption: 2200 W

throwing out from the openings in the iron

sole (12).

Specifications subject to change without prior

Slightly sway the iron back and forth, until

notice.

water goes out of the water tank (11).

Place the iron on the base (8) and let it cool

Service life of appliance - 3 years

down completely.

When the sole (12) cools down completely,

GUARANTEE

wipe it with a dry cloth.

Details regarding guarantee conditions can

Before you take the iron for storing, make

be obtained from the dealer from whom the

sure that there is no water in the water tank

appliance was purchased. The bill of sale or

(11) and that the iron sole (12) is completely

receipt must be produced when making any

dry.

claim under the terms of this guarantee.

CARE AND CLEANING

This product conforms to the EMC-

Before cleaning the iron, make sure that it is

Requirements as laid down by the

turned off and has cooled completely.

Council Directive 89/336/EEC

Wipe the iron’s outer surface with a damp

and to the Law Voltage Regulation

cloth and then wipe dry.

(73/23 EEC)

Sediment on the iron sole can be removed

7

1253.indd 71253.indd 7 27.05.2010 10:58:5127.05.2010 10:58:51