Vitek VT-1116: Гарантийный талон

Гарантийный талон

ENGLISH

Сведения о покупке

Модель:

Серийный №:

KT 111600000

Дата покупки:

Сведения о продавце

Название и адрес продающей организации

Телефон:

Подтверждаю получение исправного изделия, с условиями гарантии ознакомлен

П

одпись покупателя

М.П.

Внимание!

Гарантийный талон действителен только при наличии печати

продающей организации

Модель: Серийный №:

KT 111600000

Дата поступления в ремонт:

Дата выполнения ремонта:

Вид ремонта:

М.П.

Купон №3

Модель: Серийный №:

KT 111600000

Дата поступления в ремонт:

!MAIN ELEMENT OF YOUR CORDLESS KETTLE

Дата выполнения ремонта:

1. Hinge Lid

Вид ремонта:

М.П.

2. Cordless base with cord storage

3. Switch button

Купон №2

4. Water Gauges (Both sides)

5. Filter (inside the spout)

Модель: Серийный №:

KT 111600000

Дата поступления в ремонт:

Дата выполнения ремонта:

2

Вид ремонта:

М.П.

Купон №1

ENGLISH

!INSTRUCTION FOR USE OF THIS APPLIANCE

• Before using for the first time, boil the kettle twice with clear water to make

sure that it is completely clean. Pour away all the boiled water and refill.

• Kettle can be filled either through the spout or open the lid. Then fill water.

• Water level can be estimated through the window gauges at both sides on

body.

• After filling your kettle with water, place the kettle to the power base unit,

ensure the kettle completely sits on the connector. Plug in and switch on the

wall socket. Switch on the kettle by pressing down the switch button.

• Do not overfill the kettle over the Max. level. However the minimum amount

of water should reach the Min. marking.

• When the water boils, kettle will be automatically switch off .

• To reYboil the water, switch on again by just pressing down the switch button

once again. If the kettle has just switch off automatically, waiting for a minute

before switching it.

• If the kettle do not fill with enough water or it is empty; switch on the kettle will

cause the safety cutout switch off the power automatically. If this happens,

set the switch level to OFF position and wait for a few minutes for the appliY

ance to cool down, then refill with enough water and switch on as normal.

• Before removes the kettle from power stand, ensure that the kettle is

switched off.

• Power cord could be stand into the power base by just push the cord inside

the base.

!FILTER

• If appliance installed with the filter always fill the appliance through the spout,

as this will help to restrict any major impurities & lime scale.

• To remove the filter, open the lid and empty the appliance. Push the filter outY

ward the tab.

• ReYinstall the filter, slide it into the tag and press down, it will snap on the tag

firmly. Ensure the filter is properly fit into the spout location.

!CLEANING AND MAINTENANCE

• Before cleaning the kettle, ensure it has been unplug. Do not immerse the

310