Pioneer PDK-TS36B: Fixing the rotation to the front

Fixing the rotation to the front

Stabilize the equipment as shown in the diagram using

screws that are available on the market.

10

En

Use a screw that has a nominal

diameter of M4 and length

from 20 mm to 30 mm (13/16 to

1-3/16 inch) to fix the rotation

to the front.

Detaching the Pioneer Television from the Stand

4

Referring to steps 2 and 3 in “Attaching

To remove the Pioneer television from the

stand, be sure to always follow the procedure

the Pioneer Television” (Page 5.), remove

described below to prevent accidents.

the installation screws (4 screws).

1

First, confirm that the forward/backward

inclination anchor bolt is securely

tightened.

2

First clear a space on a flat floor etc.

where you can lay the Pioneer television

flat, then lay a sheet to protect it from

scratches or other damage.

3

Remove the speakers.

Do not remove the screws (M8 x 16 mm: silver) by

procedure 2 in Page 5. The support columns might slip out

of place and fall over.

5

Holding the Pioneer television by its

handles and from the bottom, lift the

display vertically.

6

Place the Pioneer television slowly onto

the sheet laid out in step 2 with its screen

facing downwards.

When reattaching the Pioneer television to the stand, be

certain that the left/right support columns are set at the

same angle.

Specifications

External dimensions 577 mm (W) x 321 mm (H) x 380 mm (D) (22-23/32 in. (W) x 12-5/8 in.(H) x 14-31/32 in. (D))

[When using the support columns S]

Weight 10.8 kg (23.9 lbs)

• The above specifications and exterior may be modified without prior notice to improve the product.