Pioneer PDK-TS36B: Preventing Equipment from Falling Over

Preventing Equipment from Falling Over: Pioneer PDK-TS36B

Preventing Equipment from Falling Over

After installing the stand, be sure to take special care to ensure that the Pioneer television

will not fall over.

English

Because of the Pioneer televisions weight, if it could fall down, this can result in injury.

For safety, be sure to take special care to ensure that the Pioneer television will not fall over.

Stabilizing on TV table or other location

Stabilize the equipment as shown in the diagram using

screws that are available on the market.

9

En



A TV table with adequate strength, width and depth

should

always be used to support the Pioneer television.

Failure to do so could result in falling over.

To stabilize the Pioneer

television on a TV table, use

screws that have a nominal

diameter of 6 mm (1/4 inch).

Select the appropriate screws

after consulting a professional

installer if necessary.



Using a wall for stabilization

1

Attaching falling prevention bolts to the

Pioneer television.

2

Using strong cords to stabilize it

appropriately and firmly to a wall, pillar,

or other sturdy element.

Perform this work in the same way on the left and

right sides.

The length of the cords used must be long enough to

allow the stand to rotate freely.

A table with adequate strength should always be used

to support the Pioneer television. Failure to do so could

result in personal injury and physical damage.

When installing the Pioneer television, please take the

necessary safety measures to prevent it from falling or

overturning in case of emergencies, such as earthquakes,

or of accidents.

If you do not take these precautions, the Pioneer

television could fall down and cause injury.

The screws, hooks and other fittings that you use

to secure the Pioneer television to prevent it from

overturning will vary according to the composition and

thickness of the surface to which it will be attached.

Select the appropriate screws, hooks and other fittings

after first inspecting the surface carefully to determine

its thickness and composition and after consulting a

professional installer if necessary.



Use falling prevention bolts,

ropes and fittings that are

available on the market.

Recommended bolts:

Nominal diameter M8

Length 12 mm to 15 mm (1/2 to 5/8 inch)







Position of table screws: Without speakers

Unit: mm (inch)



 

























Оглавление