Pioneer PDK-TS36B: Attaching the Pioneer Television

Attaching the Pioneer Television: Pioneer PDK-TS36B

Attaching the Pioneer Television

The weight of a 50 inch Pioneer television

(without speaker) is about 34 kg (75 lbs), they

have no depth, and are unstable. Therefore,

at least two people must assemble and install

English

them.

5

En



Be sure to install it on a flat stable location.

Insert the screws in the holes vertically and do not tighten

them with more force than necessary.

Make sure that you install the support columns reliably with

reference to the procedure in “Assembling the Stand”.

Attachment Method

1

Attaching the Pioneer television to the

stand.

Fit the stand’s support columns to the bottom of the

Pioneer television as indicated by the arrows, then slowly

insert them vertically. Be extremely careful not to insert

the support columns of the stand into any part of the

Pioneer television other than the stand insertion slots.

Note that doing so might damage the Pioneer television

panel or its ports or result in the warping of the stand.











2

Securing the Pioneer television with

Installation screws

.

Secure them using the enclosed hexagonal wrench.









3

Securing the Pioneer television with

Installation screws

.

Attach the Pioneer television at the points marked with

“T” using the enclosed hexagonal wrench.

There have been cases where unforeseen

accidents such as the equipment breaking or

falling over occurred because the stand was

installed with wrong screws.





4

Attaching the speakers.

Refer to the operating instructions for the speaker for the

installation method.

Оглавление