AEG MC 4465 BT: English

English

53

Press three times = All the music tracks are played back in

4. Press the button (6). The playback starts. The notifica-

random order. The notification “RAN”

tion “MEM” will appear additionally in the display.

appears on the display. “RANDOM“

5. Press once the ST/MO/ button to stop the playback

appears in the display.

while retaining the program.

Press four times = All functions are cancelled. The normal

6. To play the programme back again, press the

button.

play mode is resumed. “OFF“ appears

The device stops automatically after all programmed titles

in the display.

have been played. The programmed sequence will remain in

During playback of MP3 music:

the memory until you switch to a different operating mode.

Press once = The current track is repeated continuous-

ly. The message “ ” will flash on the

Deleting programmed files

display. “RPT-1” appears in the display.

When in stop mode, press the ST/MO/

button again.

Press twice = The selected folder is repeated continu-

“MEM” disappears from the display.

ously ( appears in the display).

“RPT-ALB“ appears in the display.

Playing back Music in MP3 Format

Press three times = All music titles are repeated continu-

ously. The message “ ” is lit on the dis-

With this device it is possible to play back pieces of music in

play. “RPT-ALL“ appears in the display.

MP3 format. The device also supports all standard CD types:

Press four times = All the music tracks are played back in

CD, CD-RW, CD-R.

random order. The notification “RAN”

This machine of is able to play MP3 CDs. Up to 200 tracks

appears on the display. “RANDOM“

can be compressed and stored on these CDs. Your machine

appears in the display.

detects an MP3 CD automatically (the total number of tracks

Press five times = All the functions are deactivated.

and MP3s appears in the display). If you would like to play

Playback is continued normally. “OFF“

one of these CDs, proceed as described under “Playing

appears in the display.

CDs/MP3”. Tracks can be programmed as described under

“Playing Back Programmed Tracks”.

+10 / –10 buttons (6 on the remote control)

Press one of the buttons to skip forward or backward 10

Please note:

songs. The requirement is that more than 10 songs are avail

-

There are a number of different recording and compression

able.

methods, as well as quality differences between CDs and self-

recorded CDs.

FOLDER/PRE / FOLDER/PRE buttons (8/18)

Furthermore, the music industry does not adhere to xed

During playback of MP3 files:

standards (copy protection).

Press one of the buttons in order to switch to the next or

previous folder. The device will play the music files of the

For these reasons it is possible that in rare cases there are

selected folder.

problems with the playback of CDs and MP3 CDs. This is not

a malfunction of the device.

Programmed Play

AUX IN socket

This can be used to program any desired sequence of tracks.

(Only in CD-/USB-/CARD mode)

To connect analogue replay devices. Via this socket you can

also hear the sound of other playback devices such as MP3

1. Press the ST/MO/

button (20).

players, CD players etc. through the loudspeakers.

2. Press the MEM/CLK-ADJ button (21). “MEM” and

“01PR” appear in the display and the memory position

1. Please connect the external device with a 3.5 mm stereo

“01” is flashing. Use the /TUNE+ / /TUNE– but-

jack plug to the AUX-IN socket.

tons (9/17) to select the desired track and then press the

2. Repeatedly press the FUNCTION button (4), until “AUX”

MEM/CLK-ADJ button again. The display changes to

is shown in the display.

memory slot PR02.

3. You will hear the sound playback from the external device

3. Select the next track with the /TUNE+ / /TUNE– but-

through the loudspeakers. You may use the VOLUME

tons and press the MEM/CLK-ADJ button again. Repeat

control (2) to adjust the volume. The CD buttons are not

the procedure until all the desired tracks are selected.

functional.

4. For the remaining procedure please see the operating

NOTE:

instructions of the external sound source.

Once the storage capacity of the tracks to be program

-

med has been reached “FULL” flashes in the display.

NOTE:

Adjust the volume of the external device to a comfortable

level.