AEG MC 4465 BT: English

52

English

That is not a malfunction of the device.

NOTE:

• Some of the mobile phone brands have an energy-

1. Press the FUNCTION button (4) repeatedly until “CARD”

saving mode. Deactivate the energy-saving mode as

is shown on the display.

it can otherwise result in problems during the data

2. Insert an SD memory card. Playback starts automatically

transfer through Bluetooth.

after a few seconds.

• To be able to transfer audio data, Bluetooth needs to

For operation, please refer to the section “Description of the

stay activated in your player. Observe the operation

control buttons”.

manual of your player.

CAUTION:

• If a mobile phone on which you are playing music

Switch the device to another operating mode before remo

-

receives a call, the music will be interrupted. However,

ving the memory card.

the sound is not played back by the device. After you

have ended the call, the devices are connected to each

other again and playback continues.

Description of the control buttons

(CD/USB/CARD)

Playing music via USB (13)

NOTE:

This device has been developed in line with the latest techni-

Not all the functions may be supported depending on the

cal advances in the USB field. The wide range of different

playback device.

USB storage devices of all types which are currently on the

market, unfortunately do not allow us to guarantee full com-

patibility with all USB storage devices. For this reason, in rare

(6)

cases there may be problems in playing back files from USB

You can briefly interrupt and resume playback using this

storage devices. This is not a malfunction of the device. Only

button. The notification on the display flashes. Pressing again

use commercially available USB sticks!

continues playback.

1. Press the FUNCTION button (4) repeatedly until “USB” is

shown on the display.

/TUNE+ (9)

2. Connect a USB storage device directly into the port.

With

you can jump to the next or previous track etc.

Playback will automatically start after a few seconds.

• If the button is kept pressed down, the machine starts to

For operation, please refer to the section “Description of the

search through the tracks.

control buttons”.

/TUNE– (17)

NOTE:

The

button can be used as follows:

• Always directly connect a USB storage medium to the

Press once = This starts the current track again from

USB port to prevent any malfunctions.

the beginning.

• The USB port is not designed for charging external

Press twice = This jumps back to the previous track.

devices.

Press three times = This plays the song before etc. If the but-

• Important note: The USB port is only intended for

ton is kept pressed down, the machine

music playback via USB sticks. It only guarantees a low

starts to search through the tracks.

power supply (100 mA). This USB port is not suitable

for using external 2.5” hard drives that require starting

ST/MO/ (20)

currents of up to 1100mA. In order to play music from

The playback is stopped.

smartphones or iPods or iPhones, use the designated

AUX-IN socket or Bluetooth function.

MEM/CLK-ADJ (21)

CAUTION:

In stop mode for programming any order of tracks (see the

Switch the device to a different operating mode before you

section on “Programmed Play”).

remove the USB storage device.

PLAY MODE (19)

During the playback of an audio CD:

Playing music from memory cards (14)

Press once = The current track is repeated continuous-

This device has been designed based on the latest technolo-

ly. The message “ ” will flash on the

gies available in the field of memory cards. The large variety

display. “RPT-1” appears in the display.

of memory cards available today though makes it impos-

Press twice = The whole CD is played continuously.

sible to guarantee full compatibility. For that reason, playing

The message “

” is lit on the display.

memory cards might encounter problems in some rare cases.

“RPT-ALL” appears in the display.