AEG MC 4465 BT: English

English

51

4. Press the MEM/CLK-ADJ button. The radio sta-

This device offers you the possibility to use a Bluetooth-

tion will be preset.

enabled device. The functional radius is limited to approx.

15 metres depending on the surroundings and the unit used.

Switching between stereo/mono (AUTO/MONO)

If your playing device supports the A2DP profile (Advanced

In the event of poor reception, you have the following two

Audio Distribution Profile) and has a music-player function,

options:

then you can also wirelessly transfer music to the device. The

• Change the position of the wire antenna.

A2DP profile involves a multi-vendor Bluetooth profile. By

• Use the ST/MO/

button (20) to switch to mono recep-

streaming, stereo-audio signals are wirelessly transferred be

-

tion.

tween the playing device (source) and the receiving device.

NOTE:

To be able to remotely control the source, the playback de-

vice must support the AVRCP profile (Audio Video Remote

During stereo reception, the symbol “

” will be shown

Control Profile).

in the display.

Due to the different device manufacturers, models, and

Selecting preset radio stations

software versions, a full functionality cannot be guaranteed.

The preset radio stations may be selected by repeatedly

Logging on devices (Pairing)

pressing the FOLDER/PRE

/ FOLDER/PRE buttons.

Before you listen to music via the unit, you must pair the

devices.

Playing CDs/MP3

1. Ensure, that the Bluetooth function is activated in your

1. Select the CD mode with the FUNCTION button (4). The

player (e.g. mobile phone). For this, refer to the operation

following will appear in the display “CD”.

manual of your player.

2. Open the CD tray (15), by pressing the

button (10).

2. Use the FUNCTION button (4) to select BT mode. The

3. Place a CD with the printed side facing upwards on the

display shows “PAIRING”. This signalizes that the device

CD tray.

is in pairing mode.

4. Close the CD compartment by pressing the

button

3. Choose the Bluetooth menu in your player and register

again. The display will show “READING”, followed a little

the device in your player. For this, refer to the operation

bit later by “01- 00:00” indicating the first song.

manual of your player. The device “AEG MC 4465 BT”

will show in your player as a selection.

NOTE:

• When inserting MP3 CDs, the display will rst show

NOTE:

“A01 T001” indicating the first folder (A) and then

Only one playback device can be connected with the

show the first song (T).

device at one time. If the device is already connected

• For storage media with more than 999 songs, the

with another playback device, the device will not appe-

display will not show the thousands digit.

ar in the BT selection menu.

5. The CD will play from the first title. The elapsed playing

4. Now enter the password “0000” in your player, depend

-

time and the current track will be shown in the display.

ing on the device manufacturers, model, and software

Always keep the CD compartment closed.

version.

After successful registration, “BT” appears in the display. For

NOTE:

the further procedure, please refer to the user manual of the

• If a disc is inserted the wrong way around, respectively

playback unit. If possible, adjust the volume of the external

if no disc is inserted, then the message “READING” will

unit to a comfortable level.

blink and “NO DISC” appears on the display.

• Playback of CDs produced by the user cannot be

NOTE:

guaranteed due to the large variety of software and CD

• Depending on the device manufacturer, you need to

media available.

perform the registration (PAIRING) again to connect the

devices.

• In case of problems with the registration of a replay

Playing back music via Bluetooth

device, deactivate the WiFi-/ and mobile data function

in your playback device.

Bluetooth involves a technology for wireless radio connec-

• The Bluetooth compatibility cannot be ensured for

tion of devices over a short distance. Devices with Bluetooth

devices (e.g. mobile phones) getting released in the

standard are transmitting between 2.402 and 2.480 GHz in

future.

the ISM band (Industrial, Scientific and Medical). Interference

• To ensure an optimal connection, make sure that the

can be caused for example by WLAN-networks, DAB radios,

battery of your player is completely charged.

cordless phones, or microwave ovens which work on the

same frequency band.