AEG BSS 4806: English

36

English

Infrared Remote Control

until you have found the radio station which you are look-

For wireless control within a distance of 5 m. If the distance

ing for.

decreases you should change the batteries. For proper

Preset station: To preset the found station, press the

operation mind a clear view between the remote control and

REPEAT / MEMORY button (12). Select a preset location

the sensor on the device.

with the buttons

RADIO+ / RADIO- (13). Press the

REPEAT / MEMORY button one more. The station is

FUNCTION (2 on the device)

preset .

3. If the reception is too weak and there is interference on

Press the FUNCTION button (2 on the device) until the

the received station, try to improve the reception by alter-

desired operating mode is shown on the display.

ing the position and uncoiling or coiling the antenna. For

FM stations, you can use the MO/ST button (8) to switch

Sound Settings

between mono and stereo reception. We recommend

(Preset equalizer function) Different sound modes are avail-

that you switch to mono in case of bad reception. The

able. (FLAT, ROCK, POP S, JAZZ, VOCAL, DISCO).

message “ST” is shown on the display for stereo recep-

NOTE:

tion.

If necessary, change the EQ setting in your playback unit to

create the best sound.

Select the preset radio station

The preset radio stations can be selected by repeatedly

pressing the

RADIO+ / RADIO- button (13) .

LOUDNE (11)

Activates or deactivates the loudness function. When the

loudness function is activated, the bass is increased.

Playing back music files

When activating the function, the message “Ld ON” briefly

You have three options to play back your own music files with

appears on the display. When deactivating the function, “Ld

the unit: hardwired, wireless via Bluetooth, or via the USB port.

OFF” briefly appears on the display.

By cable (Cable not included)

CH-LEVEL (9)

The device has two connection options: AUX IN (8) and LINE

Repeatedly press the button to make the following sound

IN (10).

adjustments. Make the adjustments with the VOL+/- buttons

(6).

1. If required, use a suitable adapter (not included).

 Connecttheexternaldeviceasfollows:

• LV=Volumeleftspeaker(0-15)

•

With a 3.5 mm stereo jack plug to the LINE IN socket (10).

• rV=Volumerightspeaker(0-15)

• Withacinchcable(2xRCA)totheAUXINsocketson

• SV=Volumeoftheintegratedsubwoofer(0-15)

the rear side of the device.

• bA=Bass(-06to06)

2. Depending on the connection used, press the BLUE-

• tr=Treble(-06to06)

TOOTH/LINE button (3), until LINE IN is shown on the

• VOL=Volume(00-30)

display, or the AUX button (14).

3. Start the playback of your audio source. Listen to the

MUTE (1)

sound playback via the speaker. You can adjust the

For immediate muting of the volume. Press MUTE again to

volume using the VOL+/VOL- buttons (6/3).

cancel the function.

4. For the further procedure, please refer to the user manual

NOTE:

oftheexternalaudiosource.

The activated setting is shown on the display by the “ON”

NOTE:

symbol.

Ifpossible,adjustthevolumeoftheexternalunittoacom-

fortable level.

Radio mode

Cordless via Bluetooth

1. Fully uncoil the wire antenna.

Bluetooth involves a technology for wireless radio connec-

2. Automatically search for radio stations:

tion of devices over a short distance. Devices with Bluetooth

Press the SCAN button (7). The unit scans the complete

standard are transmitting between 2.402 and 2.480 GHz in

frequency band for stations. The radio stations found are

the ISM band (Industrial, Scientific and Medical). Interference

stored in ascending order of frequency. The sequence

canbecausedforexamplebyWLAN-networks,DABradios,

cannot be altered later.

cordless phones, or microwave ovens which work on the

Manual scan for radio stations:

same frequency band.

Briefly press the SEARCH+ / SEARCH- button (13),