AEG BBS 12C2: 20 21 ENGLISH ENGLISH

TECHNICAL DATA Cordless Drill Driver

BBS 12C2

EC-DECLARATION OF CONFORMITY

SYMBOLS

Production code.......................................................................

..................... 4430 21 01...

We declare under our sole responsibility that the product

...000001-999999

described under “Technical Data” fullls all the relevant

Please read the instructions carefully before

Drilling capacity in steel ...........................................................

...........................10 mm

regulations and the directives 2011/65/EU (RoHs),

starting the machine.

Drilling capacity in wood ..........................................................

...........................20 mm

2006/42/EC, 2004/108/EC and the following harmonized

Wood screws (without pre-drilling) ..........................................

.............................6 mm

standards have been used:

-1

No-load speed, 1st gear ..........................................................

......................0-400 min

EN 60745-1:2009 + A11:2010

-1

No-load speed, 2nd gear .........................................................

....................0-1500 min

EN 60745-2-1:2010

Remove the battery pack before starting any

Torque * (1,5 Ah)......................................................................

...........................32 Nm

EN 60745-2-2:2010

work on the machine.

Torque * (3,0 Ah)......................................................................

...........................40 Nm

EN 55014-1:2006 + A1:2009 + A2:2011

Battery voltage.........................................................................

...........................12 V

EN 55014-2:1997 + A1:2001 + A2:2008

Drill chuck range ......................................................................

...........................10 mm

Do not dispose of electric tools together with

Weight according EPTA-Procedure 01/2003 (1,5 Ah) .............

........................1,27 kg

household waste material! In observance of

Winnenden, 2013-06-25

Weight according EPTA-Procedure 01/2003 (3,0 Ah) .............

........................1,47 kg

European Directive 2002/96/EC on waste

electrical and electronic equipment and its

implementation in accordance with national law,

Noise/vibration information

electric tools that have reached the end of their

Measured values determined according to EN 60 745.

Alexander Krug

life must be collected separately and returned to

Typically, the A-weighted noise levels of the tool are:

Managing Director

an environmentally compatible recycling facility.

Sound pressure level (K = 3 dB(A)) .......................................

...........................69 dB (A)

Sound power level (K = 3 dB(A)) ............................................

...........................80 dB (A)

Authorized to compile the technical le.

Always wear ear protectors!

Techtronic Industries GmbH

Max-Eyth-Straße 10

Total vibration values (vector sum in the three axes)

71364 Winnenden

determined according to EN 60745.

Germany

Drilling into metal, chuck head

2

Vibration emission value a

................................................

..........................1,1 m/s

BATTERIES

h,D

2

Uncertainty K ........................................................................

..........................1,5 m/s

New battery packs reach full loading capacity after 4 - 5

Screw driving without impact, chuck head

chargings and dischargings. Battery packs which have not

2

Vibration emission value a

...................................................

..........................0,6 m/s

h

been used for some time should be recharged before use.

2

Uncertainty K ........................................................................

..........................1,5 m/s

Temperatures in excess of 50°C (122°F) reduce the

Screw driving without impact, right angle head

2

performance of the battery pack. Avoid extended exposure

Vibration emission value a

...................................................

..........................0,6 m/s

h

2

to heat or sunshine (risk of overheating).

Uncertainty K ........................................................................

..........................1,5 m/s

Screw driving without impact, offset head

The contacts of chargers and battery packs must be kept

2

Vibration emission value a

...................................................

..........................0,6 m/s

clean.

h

2

Uncertainty K ........................................................................

..........................1,5 m/s

For an optimum life-time, the battery packs have to be fully

charged, after used.

* Measured according to AEG standard N 877318

BATTERY PACK PROTECTION

WARNING

The battery pack has overload protection that protects it

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given

from being overloaded and helps to ensure long life.

in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.

Under extreme stress the battery electronics switch off the

machine automatically. To restart, switch the machine off

The declared vibration emission level represents the main applications of the tool. However if the tool is used for different

and then on again. If the machine does not start up again,

applications, with different accessories or poorly maintained, the vibration emission may differ. This may signicantly increase

the battery pack may have discharged completely. In this

the exposure level over the total working period.

case it must be recharged in the battery charger.

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or

when it is running but not actually doing the job. This may signicantly reduce the exposure level over the total working period.

MAINTENANCE

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the

Use only AEG accessories and spare parts. Should

accessories, keep the hands warm, organisation of work patterns.

components need to be replaced which have not been

described, please contact one of our AEG service agents

(see our list of guarantee/service addresses).

Do not dispose of used battery packs in the household

WARNING! Read all safety warnings and all

If needed, an exploded view of the tool can be ordered.

refuse or by burning them. AEG Distributors offer to retrieve

instructions. Failure to follow the warnings and instructions

Please state the machine type printed as well as the six-digit

old batteries to protect our environment.

may result in electric shock, re and/or serious injury.

No. on the label and order the drawing at your local service

Save all warnings and instructions for future reference.

Do not store the battery pack together with metal objects

agents or directly at: Techtronic Industries GmbH,

(short circuit risk).

Max-Eyth-Straße 10, 71364 Winnenden, Germany.

DRILL DRIVER SAFETY WARNINGS

Use only System PCLS chargers for charging System PCLS

battery packs. Do not use battery packs from other systems.

Hold power tool by insulated gripping surfaces, when

performing an operation where the cutting accessory

Battery acid may leak from damaged batteries under

may contact hidden wiring. Cutting accessory contacting

extreme load or extreme temperatures. In case of contact

a „live“ wire may make exposed metal parts of the power

with battery acid wash it off immediately with soap and

tool „live“ and could give the operator an electric shock.

water. In case of eye contact rinse thoroughly for at least 10

minutes and immediately seek medical attention.

Hold power tool by insulated gripping surfaces, when

performing an operation where the fastener may

SPECIFIED CONDITIONS OF USE

contact hidden wiring. Fasteners contacting a "live" wire

may make exposed metal parts of the power tool "live" and

The battery drill/screwdriver may be used for drilling and

could give the operator an electric shock.

screwdriving for independent use away from mains supply.

Sawdust and splinters must not be removed while the

Do not use this product in any other way as stated for

machine is running.

normal use.

When working in walls ceiling, or oor, take care to avoid

electric cables and gas or waterpipes.

Remove the battery pack before starting any work on the

machine.

20 21

ENGLISH

ENGLISH