Pioneer mvh-170ub: Radio

Canceling the demonstration display (DEMO OFF)

Radio

1 Press the M.C. dial to display the main menu.

The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the

2 Turn the M.C. dial to select [SYSTEM], then press to confirm.

Middle East, Africa and Oceania. Use in other areas may result in poor reception. The RDS

(radio data system) function only works in areas that broadcast RDS signals for FM

3 Turn the M.C. dial to select [DEMO OFF], then press to confirm.

English

stations.

4 Turn the M.C. dial to select [YES], then press to confirm.

Receiving preset stations

INITIAL settings

1 Press SRC/OFF to select [RADIO].

1 Press and hold SRC/OFF until the unit turns off.

2 Press BAND/ to select the band from [FM1], [FM2], [FM3], [MW] or [LW].

2 Press and hold SRC/OFF to display the main menu.

3 Press a number button (1/ to 6/).

3 Turn the M.C. dial to select [INITIAL], then press to confirm.

TIP

The / buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the

4 Turn the M.C. dial to select an option, then press to confirm.

FUNCTION settings (page 12).

NOTE

The options vary depending on the unit.

Best stations memory (BSM)

Menu Item Description

The six strongest stations are stored on the number buttons (1/ to 6/).

FM STEP Select the FM tuning step from 100 kHz or 50 kHz.

1 After selecting the band, press the M.C. dial to display the main menu.

[100], [50]

2 Turn the M.C. dial to select [FUNCTION], then press to confirm.

SP-P/O MODE Select when there is a full-range speaker connected to the rear

speaker output leads and there is a subwoofer connected to the

[REAR/SUB.W]

3 Turn the M.C. dial to select [BSM], then press to confirm.

RCA output.

[SUB.W/SUB.W] Select when there is a passive subwoofer connected directly to

the rear speaker output leads and there is a subwoofer

To seek a station manually

connected to the RCA output.

1

After selecting the band, press / to select a station.

[REAR/REAR] Select when there are full-range speakers connected to the rear

Press and hold / then release to seek an available station. Scanning stops

speaker output leads and RCA output. If there is a full-range

when the unit receives a station. To cancel seek tuning, press / .

speaker connected to the rear speaker output leads, and the

RCA output is not used, you may select either [REAR/SUB.W] or

NOTE

[REAR/REAR].

[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 12).

S/W UPDATE Select to update the unit to the latest Bluetooth software. For

details on Bluetooth software and updating, visit our website.

To store stations manually

SYSTEM RESET Select [YES] to initialize the unit settings. The unit will be

1

While receiving the station you want to store, press and hold one of the number

restarted automatically. (Some of the settings will be retained

[YES], [CANCEL]

buttons (1/ to 6/) until it stops flashing.

even after resetting the unit, such as Bluetooth pairing

information, etc.)

5En