Pioneer GM-D8601: Additional information

Appendix

Additional information

Weight .......................................... 3.3 kg (Leads for wiring not

Specifications

included)

GM-D8601

Maximum power output ....... 1 000 W × 1 (4 W) / 2 400 W

Power source ............................. 14.4 V DC (10.8 V to 15.1 V

×1(1W)

allowable)

Continuous powe r output ... 500 W × 1 (at 14.4 V, 4 W,

Grounding system ................... Negative type

20 Hz to 240 Hz, ≦ 1 % THD)

Current consumption ............ 24 A (at continuous power,

800 W × 1 (at 14.4 V, 2 W,

4 W)

100 Hz, ≦ 1 % THD)

Average current drawn ......... 2.9 A (4 W for one channel)

1 200 W × 1 (at 14.4 V, 1 W,

4.0 A (2 W for one channel)

100 Hz, ≦ 1 % THD)

6.0 A (1 W for one channel)

Load impedance ...................... 4 W (1 W to 8 W allowable)

Fuse ................................................ 40 A × 2

Frequency response ............... 10 Hz to 240 Hz (+0 dB,

Dimensions (W × H × D) ... 265 mm × 60 mm ×

–3 dB)

200 mm

Signal-to-noise ratio ............... 100 dB (IEC-A network)

Weight .......................................... 2.7 kg (Leads for wiring not

Low pass filter:

included)

Cut off frequency ........... 40 Hz to 240 Hz

Maximum power output ....... 600 W × 1 (4 W)/1600W×

Cut off slope ..................... –12 dB/oct

1(1W)

Bass boost:

Continuous powe r output ... 300 W × 1 (at 14.4 V, 4 W,

Frequency .......................... 50 Hz

20 Hz to 240 Hz, ≦ 1 % THD)

Level ..................................... 0dBto18dB

500 W × 1 (at 14.4 V, 2 W,

Gain control:

100 Hz, ≦ 1 % THD)

RCA ...................................... 200 mV to 6.5 V

800 W × 1 (at 14.4 V, 1 W,

Speaker .............................. 0.8 V to 16 V

100 Hz, ≦ 1 % THD)

Maximum input level / impedance:

Load impedance ...................... 4 W (1 W to 8 W allowable)

RCA ...................................... 6.5 V / 25 kW

Frequency response ............... 10 Hz to 240 Hz (+0 dB,

Speaker .............................. 16 V / 12 kW

–3 dB)

Signal-to-noise ratio ............... 100 dB (IEC-A network)

Notes

Low pass filter:

! Specifications and the design are subject to

Cut off frequency ........... 40 Hz to 240 Hz

modifications without notice.

Cut off slope ..................... –12 dB/oct

! The average current drawn is nearly the maxi-

Bass boost:

mum current drawn by this unit when an

Frequency .......................... 50 Hz

audio signal is input. Use this value when

Level ..................................... 0dBto18dB

Gain control:

working out total current drawn by multiple

RCA ...................................... 200 mV to 6.5 V

power amplifiers.

Speaker .............................. 0.8 V to 16 V

Maximum input level / impedance:

RCA ...................................... 6.5 V / 25 kW

Speaker .............................. 16 V / 12 kW

GM-D9601

Power source ............................. 14.4 V DC (10.8 V to 15.1 V

allowable)

Grounding system ................... Negative type

Current consumption ............ 39 A (at continuous power,

4 W)

Average current drawn ......... 3.7 A (4 W for one channel)

5.2 A (2 W for one channel)

7.5 A (1 W for one channel)

Fuse ................................................ 40 A × 3

Dimensions (W × H × D) ... 315 mm × 60 mm ×

200 mm

12

En