AEG mc 4459 bt: English
English: AEG mc 4459 bt
English
35
a) Switch the device to Mono operation. Press the ST/
General Operation
MONO button (11 on the remote control) to do so.
The stereo indicator “ST” lights up on the display.
NOTE:
b) Try to improve the reception through a position
Some buttons are to be found both on the device itself and
change or through coiling in and out of the antenna.
on the remote control. Buttons with the same designation
have the same function.
Save radio stations
The unit can store up to 30 radio stations. To store a station,
Turning the unit on/off
proceed as follows:
• Pressthe
STANDBYbutton(9/23),toturntheuniton.
1. Find a station as described in “Find stations”.
• Pressthe STANDBYbuttonagaintoturntheunitoff.
2. PresstheMEMORYbutton(12ontheremotecontrol).
The power indicator lamp (11) lights up.
Thedisplaystartsashing.
3. Use the buttons
and (5 on the remote control)
Volume
to select the memory where the station is to be stored.
YoucanusetheVOL+/VOL-buttons(10/5)tosetthedesired
4. PresstheMEMORYbuttonagain.Thestationisstored
volume.
andthedisplaystopsashing.
MUTE (1 on the remote control)
Call a stored radio station
Quickly turn off the sound. The indication “MUTE” appears
• Youcancallthestoredradiostationswiththenumber
in the display. To cancel this function, press
MUTE again.
buttons (2 on the remote control). For stored radio sta-
tions above 10, first press the 10+ button.
EQ (13 on the remote control)
• Alternatively,youcanalsousethebuttons
and
(5 on the remote control).
(Preset equalizer function). There are different sound modes
available(FLAT,JAZZ,CLASSIC,ROCK,POP).
Automatic scanning
BrieyholddowntheAUTO/STOPbutton(9ontheremote
Setting the sleep timer
control). With this, the entire frequency range is scanned
When the sleep timer has been set, the unit is switched off
automatically for stations. The stations found by scanning are
after a preset time. Press the SLEEP button (14 on the remote
stored in ascending order in the memory locations 1 to 30.
control) to activate the sleep timer. By repeatedly pressing
the SLEEP button, the off time can be set as 90, 80, 70, 60, 50,
NOTE:
40, 30, 20, 10 minutes. To turn off the sleep timer, press the
The sequence cannot be changed afterwards. The preset
SLEEP button until the symbol “SL” on the display goes out.
radio stations will be lost.
“S - 00” appears in the display for a short amount of time.
Restore factory settings (in the CD (without inserted CD),
To play back music via Bluetooth
USB or BT-Mode)
Bluetooth involves a technology for wireless radio connec-
Allsettingsthatyouperformedwillbelostintheprocess.
tion of devices over a short distance. Devices with Bluetooth
• KeeptheAUTO/STOPbutton(9ontheremotecontrol)
standard are transmitting between 2.402 and 2.480 GHz in
held down until “rESEt” is shown on the display. The
the ISM band (Industrial, Scientific and Medical). Interference
device will switch to operational readiness after the reset.
canbecausedforexamplebyWLAN-networks,DABradios,
cordless phones, or microwave ovens which work on the
Listening to the Radio
same frequency band.
Find stations
This device offers you the possibility to use a Bluetooth-
1. PresstheSOURCEbutton(6/8),untilFMshowsinthe
enableddevice.Thefunctionalradiusislimitedtoapprox.
display.AlternativelyyoucanalsopresstheFMbutton
15 metres depending on the surroundings and the unit used.
(7 on the remote control) to select radio mode.
IfyourplayingdevicesupportstheA2DPprole(Advanced
2. Use the buttons TUN+ (6 on the remote control) and
Audio Distribution Profile) and has a music-player function,
TUN- (18 on the remote control) to tune to the desired
then you can also wirelessly transfer music to the device. The
station. When you hold down either button, the unit
A2DPproleinvolvesamulti-vendorBluetoothprole.By
tunestothenextradiostation.Thedisplayshowsthe
streaming, stereo-audio signals are wirelessly transferred be-
tuned frequency.
tween the playing device (source) and the receiving device.
3. In case the reception is too weak and if the received
To be able to control the source remotely, the playback de-
station has atmospheric noise, you will have the following
vicemustsupporttheAVRCPprole(Audio Video Remote
possibilities:
Control Profile).
Оглавление
- Inhalt
- Übersicht der Bedienelemente
- Deutsch
- Deutsch
- Deutsch
- Deutsch
- Deutsch
- Deutsch
- Deutsch
- Deutsch
- Français
- Français
- Français
- Français
- Français
- Français
- Français
- Español
- Español
- Español
- Español
- Español
- Español
- Español
- Italiano
- Italiano
- Italiano
- Italiano
- Italiano
- Italiano
- Italiano
- English
- English
- English
- English
- English
- English
- English