AEG KRC 4355 CD: English

English

39

Disabling the alarm

Alarm function (in standby mode)

To deactivate the alarm, press the AL SET button (15/25) until

Setting of the Alarm

the alarm symbol is no longer shown in the display.

You can set two alarm times. Proceed as follows:

1. Switch the device into standby mode with the STANDBY/

Delayed Shut-Off (SLEEP)

AL.OFF (

) button (12/35).

The unit is switched off automatically when the selected time

2. Keep the AL SET button pressed for ca. 3 seconds. The

is reached.

hoursofthecurrentlysetalarmtimestarttoash.

3. Use the buttons /F.FWD and /REW (6/7/33) for

• Selectthetimeafterwhichtheunitisswitchedoffby

setting.

repeatedly pressing the SLEEP/SNOOZE button (17/28).

4. Press the AL SET button for confirmation. The minutes

The following selections can be made: 120, 90, 60, 45, 30,

starttoash.

and 15 minutes. The notification “SLEEP” will appear in

5. Use the buttons /F.FWD and /REW for setting.

the display.

6. Press the AL SET button to confirm. Then select how you

• ThisfunctioncanbecancelledwiththeSTANDBY/

want to be awakened. Select from:

AL.OFF (

) button (12/35).

• (Buzzer):

A buzzer sounds when the alarm time is reached.

AUX IN socket

The buzzer interval increases from slow to fast. The

volume cannot be adjusted.

To connect analogue replay devices. Via this socket you can

• FM:

also hear the sound of other playback devices such as MP3

As soon as your set alarm time is shown, the radio

players, CD players etc. through the loudspeakers.

switches on. The last set station is played.

1. ConnectanexternaldevicetotheAUXINjacks(2xRCA)

• CD:

on the back of the device. Use a suitable adapter cable

As soon as your specified alarm time has been

(not supplied).

reached, the device will start in CD mode. The inser-

2. Turn on the device with the STANDBY/AL.OFF (

) button

ted CD will be played starting with the first title.

(12/35).

7. Finally, press the AL SET button again. You will reach the

3. Use the FUNCTION button (13/27) to select the AUX

setting of the second alarm time. To set it, proceed as

mode. “AV” will appear on the display.

described above.

4. Through the loudspeakers you can hear the playback of

thesoundfromtheexternaldevice;withtheVOLUME

NOTE:

control (1) you can change the volume. The CD buttons

If you only want to set the first alarm time, press the ALM

are not functional.

SET button until the time is displayed again.

5. For the remaining procedure please see the operating

instructionsoftheexternalsoundsource.

Activating alarm time

NOTE:

You may activate the first or the second alarm time, or both.

Adjustthevolumeoftheexternaldevicetoacomfortable

1. BrieypresstheALSETbutton(15/25).“AL1”andthe

level.

symbol of the selected alarm mode will appear in the

display.

2. Press the AL SET button again. “AL 2” and the symbol of

Cleaning

the selected alarm mode will appear in the display.

3. Press the AL SET button one more time to activate both

CAUTION:

alarm times.

• Donotdiptheapplianceinwater.

• Donotuseawirebrushorotherabrasiveobjects.

Snooze function

• Donotuseanycausticorabrasivecleaningagents.

The automatic alarm can be switched off using the SLEEP/

• Removetheplugbeforecleaning.

SNOOZEbutton(17/29)forapprox.9minutes.Thesymbol

• Cleantheappliancewithaslightlyhumidclothwithout

“

” will appear in the display.

any additives.

Switch off the buzzer

In order to switch off the alarm until the following day please

press the STANDBY/AL.OFF /

button.