AEG KRC 4350 BT: English

English

39

Setting the Alarm Time

Timer Function

Youcansetuptosixalarms.Asfollows:

You can use this function to e.g. have an overview of a spe-

ciccookingtime.Themaximumtimethatcanbesetis

1. Turn off the device with the POWER button (3).

99 minutes, 59 seconds. The previously set time is stored.

2. Press the AL+/M+ button (9), - - : - - AL1 appears on the

display. If you press the AL+/M+ button again, - - : - - AL2

• YoucanadjustthesettingswiththeTUNE+/TUNE-con-

will appear on the display etc.

trol (11).

3. After you have decided on an alarm time, select the

• AlwaysconrmyoursettingswiththePRESETbutton(10).

alarm signal with the TUNE+/TUNE- control.

1. PresstheTIMERbutton(5)1x.Thepreviouslysettime

• Withregardtothealarm,youcanchoosebetween

and TMR will appear in the display.

buzzer (

) and radio ( ).

2. Press the PRESET button (10). You can now adjust the

= Upon reaching the alarm time, a buzzer will

setting for the seconds and the minutes in turn.

sound.

3. Turn the TUNE control in the direction TUNE+, to activate

= When the alarm time has been reached,

the function.

the selected radio station will play at its

4. As soon as the display has run to zero, a buzzer will sound.

previously set volume.

Press any key to turn off the buzzer.

4. Press the PRESET button (10). The minute display will start

NOTE:

toash.

To stop the function early, turn the control in the direction

5. Perform the adjustment with the TUNE+/TUNE- control

TUNE+ once more.

(11). Confirm the entry with the PRESET button. The hour

displaywillstarttoash.

6. Set the hours with the TUNE+/TUNE- control and con-

AUX IN socket

firm with the PRESET button.

To connect analogue replay devices. Via this socket you can

6a. If you have selected the radio as the alarm signal, choose

also hear the sound of other playback devices such as MP3

the desired radio station location with the TUNE+/TUNE-

players, CD players etc. through the loudspeakers.

control. Then, press the PRESET button.

1. Pleaseconnecttheexternaldevicewitha3.5mmstereo

Snooze function

jack plug to the AUX-IN socket (12).

2. Turn on the device with the POWER button (3). Press the

The automatic alarm can be switched off using the SNZ/SLP

FUNC button (2) repeatedly until “AUd” is shown.

button(7)forapprox.5minutes.Thesymbol“

”willash

3. Through the loudspeakers you can hear the playback of

on the display.

thesoundfromtheexternaldevice;withtheVOLUME

control (1) you can change the volume.

Switch off the buzzer

4. For the remaining procedure please see the operating

In order to switch off the alarm until the following day please

instructionsoftheexternalsoundsource.

press the POWER button.

NOTE:

Disabling the alarm

• Adjustthevolumeoftheexternaldevicetoacomfort-

1. Press the AL+/M+ button (9) until the alarm time that you

able level.

want to deactivate is shown.

• Afterca.10minuteswithoutsignal,thedevicewill

2. Select the display - - : - - with the TUNE+/TUNE- control

automatically switch to standby.

(11). The alarm time has been deactivated.

Cleaning

Delayed Shut-Off

You can use the function for delayed power-off with radio

CAUTION:

operation. The unit is switched off automatically when the

• Donotdiptheapplianceinwater.

selected time is reached.

• Donotuseawirebrushorotherabrasiveobjects.

• Donotuseanycausticorabrasivecleaningagents.

• Selectthetimeafterwhichtheunitisswitchedoffbyre-

peatedly pressing the SNZ/SLP button (7). The following

• Removetheplugbeforecleaning.

selections can be made: 90, 75, 60, 45, 30 and 15 minutes.

• Cleantheappliancewithaslightlyhumidclothwithout

The display SLEEP will appear behind the time.

any additives.

• ThisfunctioncanbecancelledwiththeSNZ/SLPbutton(7).