AEG KRC 4350 BT: English

English

37

Switching the Device on/off (3)

Headphone jack (13)

Switch the device to the standby mode with the POWER

For headphone operation, use a headphone set with a

button (the date display will appear). If this button is pressed

3.5 mm stereo jack plug plugged into the

headphone jack.

once more, the device switches on again.

The speakers are switched off.

NOTE:

Volume adjusting

After about 10 minutes, the device will automatically switch

The desired volume can be sent using the VOLUME regula-

to standby.

tor (1).

TUNE+/TUNE- control (11)

Display brightness

The TUNE control is used for different settings.

The backlight of the display will automatically turn off be-

tween 11pm and 5 am.

NOTE:

The TUNE control is a push switch. Turn the push switch

until a “click” can be heard. Hold it down in the respec-

Listening to the radio

tive direction of rotation until the desired setting has been

Scanning stations

made.

• TuneintothedesiredstationwiththeTUNE+/TUNE-con-

trol (11). If you keep the control pressed in one direction,

Setting of the Clock (in Standby Mode)

thenthedevicewillsearchtothenext,orpreviousradio

• YoumakeadjustmentsusingtheTUNE+/TUNE-control

station. The display will show the respective frequency.

(11).

• Ifthereisinterferenceonthereceivedstation,tryto

• AlwaysconrmyoursettingswiththePRESETbutton(10).

improve the reception by rotating, winding or unwinding

the wire antenna.

NOTE: Changing the display format

You may optionally also use the 12-hour display for the

Presetting radio stations

time display. If you want to use this display format, we

recommend that you set the time in the afternoon. With

The device can preset up to 30 radio stations. To preset a

the 12-hour display, “PM” will appear in the display for the

station, follow the steps below:

afternoon.

1. Search for a station as described in “Scanning stations”.

1. Turn the TUNE regulator in direction TUNE+.

2. Press the PRESET button (10). The display will show

MEMORY and the respective preset location will begin to

1. Press the PRESET button (10). You may now perform the

ash.

settings in turn for the minutes and the hours.

3. Use the AL+/M+ (9) and AL-/M- (8) buttons to choose the

preset location for the corresponding station.

Setting the date (in standby mode)

4. Press the PRESET button again. The station will be pre-

• YoumakeadjustmentsusingtheTUNE+/TUNE-control

set. The MEMORY indicator and the preset location will

(11).

disappear.

• AlwaysconrmyoursettingswiththePRESETbutton(10).

Recalling preset radio stations

1. Select the date display by pushing the MODE button (4).

1. Choose the preset location with the AL+/M+ (9) and

The year display shows in the year indicator (YEAR).

AL-/M- (8) buttons.

2. Press the PRESET button (10). You can now consecu-

tively adjust the settings for the date (DATE), the month

Automatic station scan

(MONTH), and the year (YEAR). The setting for the

WhenholdingdownthePRESETbutton(10)forapprox.

weekdays changes automatically.

3 seconds, the device will start the automatic station scan

MO = Monday, TU = Tuesday, WD = Wednesday,

searching the entire frequency range automatically for

TH = Thursday, FR = Friday,

stations. The stations found will be stored on the preset loca-

SA = Saturday, SU = Sunday

tions 1-30 in ascending order.

NOTE:

Changing the display indicator

• Thescanwillonlystopafterall30presetlocationshave

You can switch between the different displays with the MODE

been filled.

button (4).

• Theordercannotbechangedonceset.