AEG DI7490-M: USE

USE

24

USE

BUTTON DISPLAY FUNCTIONS

A Displays the set speed Turns the suction motor on and off

B Displays the set speed Decreases the speed of the motor V3 V2 V1

C Displays the set speed Increases the speed of the motor V1 V2 V3

D Displays HI The spot flashes Starts maximum suction speed. After 5 minutes the speed will return

automatically to the one set before. This function can be deactivated

by pressing the button again (the decimal point at the centre of the

display will flash).

E Displays the time remaining before

Enables automatic delayed shutdown of the appliance (Delay), with a

the hood turns off (countdown)

delay that depends on the working speed set.

and the Set speed. The spot at the

Speed1 delay20 minutes

bottom right flashes

Speed 2 delay 15 minutes

Speed3 delay10minutes

The proposed delay time can be changed by pressing the button succes-

sively and selecting one of the options available (5, 10, 15, 20, 25 and

30minutes).Attheendofthetimeselectedtheappliancewillturnoff

automatically. To deactivate this function, simply press the button until

theoption selectedis 0 or turn the motor off.

F Turns the hob lighting system on and off

Displays F Indicates the need to wash the metal grease filters. The alarm is triggered

aftertheHoodhasbeeninoperationfor100workinghours.Thisindication

is only visible when the motor is turned off. To reset the alarm:

Turn the motor off and press button D for approximately 3 seconds,

until the display turns off.

Displays C Indicates the need to change the activated charcoal filters, and also to

wash the metal grease filters. The alarm is triggered after the Hood has

been in operation for 200 working hours. This indication is only visible

when the motor is turned off. This indication must be activated following

the procedure described in the section on maintenance of the activated

charcoal filter. To reset the alarm:

Turn the motor off and press button D for approximately 3 seconds,

until the display turns off.