AEG DI7490-M: MAINTENANCE

MAINTENANCE: AEG DI7490-M

25

MAINTENANCE

MAINTENANCE

Metasletal grease filters

Filters can be washed in the dish machine. They need to

be washed when F-sign appears on the display or in any

case every 2 months, or even more frequently in case of

particularly intensive use of the hood.

Alarm reset

• Switch off the hood and thelights.

• Pressthe D-key till the display is unlit.

Cleaning the filters

• Removethefiltersonebyonepushingthemtowardsthe

back side of the hood unit and simultaneously pulling

downwards.

• Any kind of bending of the filters has to be avoided

when washing them. Before fitting them again into

the hood make sure that they are completely dry. (The

colour of the filter surface may change through-out the

time but this has no influence to the filter efficiency).

• When fitting the filters into the hood pay attention

that they are mounted in correct position the handle

facing outwards.

MAINTENANCE

26

Charcoal filter (recycling version)

This filter cannot be washed or regenerated. It must be replaced when the C appears on the display or

at least once every 4 months. The filter saturation alarm has to be activated already before.

Activation of the alarm signal

• In RecirculationVersionHoods,theFilterSaturationAlarmmust be activated oninstallation or at a

later date.

• Pressandhold button E (Delay) for 5 seconds, until confirmation appears on the display:

• Cflashestwice – Activated CharcoalFiltersaturation alarmACTIVATED.

• Cflashesonce – Activated CharcoalFiltersaturation alarmDEACTIVATED.

Replacing the charcoal filter

Reset of the alarm signal

• Switch off the hood andthelighting.

• PresstheD-key until the display is unlit.

Replacing of the filter

• Remove the metal greasefilters.

• Remove the saturatedcharcoal filterbyreleasing the

fixing hooks

• Fit the new filter andfastenitin its correctposition.

• Put the metal greasefiltersintheir seats.

Lighting

LIGHT REPLACEMENT

20 W halogen light.

• Remove the 2 screwsfixing the Lighting support, and

pull it out of from the Hood.

• Extractthelamp from theSuppor.

• Replace with another of thesametype,making sure

that the two pins are properly inserted in the lamp

holder socket holes.

• Refit the Support, fixing itinplacewith the two

screws removed as above.

Оглавление