AEG BSS 4814: English

40

English

cases there may be problems in playing back files from USB

Troubleshooting

storage devices. This is not a malfunction of the device.

1. Press the INPUT button (1) repeatedly until “USb” is

Fault Cause Solution

shown on the display.

Unit cannot

Unit crashes and

Disconnect from the

2. Connect a USB storage device directly into the port.

be operated.

“hangs”.

mains for around

Playback will automatically start after a few seconds.

5seconds. Then switch

the unit on again.

For operation, please refer to the section “Description of the

controls”.

Perform a factory

reset.

see page 38

NOTE:

“Reestablishing factory

• Alwaysdirectly connect a USB storage medium to the

settings”

USB port to prevent any malfunctions.

No audio

Speaker is not paired

Check whether a

• TheUSBportisnotdesignedforchargingexternal

signal via the

to the audio source.

connectionexists.If

devices.

Bluetooth

necessary, pair the

connection

speaker again to the

CAUTION:

audio source.

Switch the device to a different operating mode before you

Volume too low Increase the volume on

remove the USB storage device.

the speaker

Increase the volume on

Description of the controls

the audio source.

Speaker

Pairing does not

Check whether the

NOTE:

cannot be

work

audio source supports

Your Bluetooth playback device has to support the follow-

connected

the A2DP protocol.

ing functions.

Audio source is

Switch on the audio

switched off

source

(9)

Bluetooth is swit-

Switch on the Blue-

You can pause and continue music playback. Press again to

ched off at the audio

tooth function in the

continue playback.

source.

audio source.

NOTE: USB Operation

Bluetooth version is

Use a different play-

• Pausemodecannotbeshowninthedisplayfortechni-

not supported.

back unit.

cal reasons.

• Wheninpausemode,theselectionofthenext,or

previous track is not possible.

Technical Specifications

Model: .................................................................................BSS 4814

(12)

Power supply: ..............................................................230 V~ 50 Hz

Press1x= Restartofthesongfromthebeginning.

Power Consumption:............................................................. 100 W

(not with USB)

Protection class: ............................................................................... .II

Press2x= Skiptotheprevioussong.

Net weight: ............................................Soundbarapprox.1.5kg

Press3x= Skiptothesongbeforetheprevioussong.

............................................ Subwooferapprox.3.2kg

Radio component:

(5)

Frequency range: .................................... FM 87.5 ~ 108 MHz

Presstoskiptothenextsongandthefollowingsongs.

Bluetooth

Bluetooth support: ........................................................V2.0 + EDR

Cleaning

Range: ..................................................................approx.15metres

Transmission frequency: ......................................2.402-2.480 GHz

Protocols: ....................................................................A2DP/AVRCP

CAUTION:

Do not submerge the device in water.

The right to make technical and design modifications in the

course of continuous product development remains reser-

• Beforecleaningdisconnectfrommainspowersupply.

ved.

• Cleanthedevicewithasoftdampclothwithoutdeter-

gents.

This device has been tested according to all relevant current

CE guidelines, such as electromagnetic compatibility and low

voltage directives, and has been constructed in accordance

with the latest safety regulations.