AEG mc 4461 bt: English

English: AEG mc 4461 bt

English

47

Setting the time

2. Press the button again while the sound mode is being

The time can only be set when the device is in standby.

displayed.

3. If no other button is pressed within about 2 seconds, the

1. Press the CLK SET button (9/6) for about 2 seconds. The

setting will be accepted. The set sound mode cannot be

displayfortheyear(YEAR)willstarttoblink.

permanently shown in the display for technical reasons.

2. Perform the setting with the

/

buttons.

3. Press the CLK SET button to save the entry.

Headphone jack (Back of the unit)

4. Repeatsteps2–3toconsecutivelyperformthesettings

For headphone operation, use headphones with a 3.5 mm

formonth(MONTH),day(DATE),timeformat(24or

jack plug which you insert into the PHONES headphone jack.

12 hour display), hours or minutes.

The speakers are turned off.

NOTE:

• Thefollowingwillappearinthedisplaywiththe

Listening to radio

12-hourdisplay:AM=Morning,PM=Afternoon.

• Thesettingfortheweekdayisdoneautomatically.

1. Completely unwind the dipole antenna.

• Thestoredtimeislostassoonasthepowersupplyhas

2. Repeatedlypressthe

/FUNCTION button (11) on the

been interrupted.

device, or FUNC (1) on the remote control until “FM” is

displayed.

3. Use the control (8) to set the desired station. The respec-

General Operation

tive frequency is shown on the display.

NOTE:

NOTE:

If the received station has atmospheric noise, try to improve

Some buttons are located both on the device and on the

the reception by changing the position and unwinding or

remote control. Identical buttons have the same effect.

winding up the antenna.

Turning on/ off the device

• Turningon:Pressthe

/FUNCTION button (11/9) to turn

To play back music via Bluetooth

the device on

Bluetooth involves a technology for wireless radio connec-

• Turningoff:Pressthe /FUNCTION button (11) on the

tion of devices over a short distance. Devices with Bluetooth

device for about 2 seconds or press the button (9) on

standard are transmitting between 2.402 and 2.480 GHz in

the remote control. The time will show on the display.

the ISM band (Industrial, Scientific and Medical). Interference

NOTE: Automatic standby function

canbecausedforexamplebyWLAN-networks,DABradios,

The USB port from your device is also suitable for charging

cordless phones, or microwave ovens which work on the

your smartphone. The music center must be turned on for

same frequency band.

this purpose. In order to comply with the “ErP 2 (Energy-re-

This device offers you the possibility to use a Bluetooth-

lated Products)” Eco-design Directive (2009/125/EC) that is

enableddevice.Thefunctionalradiusislimitedtoapprox.

aimed at improving energy efficiency and general environ-

15 metres depending on the surroundings and the unit used.

mental compatibility of electrical appliances, the devices

must switch off independently after a certain amount of

IfyourplayingdevicesupportstheA2DPprole(Advanced

time without a signal. To ensure that your smartphone is

Audio Distribution Profile) and has a music-player function,

charged, the device will therefore only switch automatically

then you can also wirelessly transfer music to the device. The

to standby after about 3 hours without signal.

A2DPproleinvolvesamulti-vendorBluetoothprole.By

streaming, stereo-audio signals are wirelessly transferred be-

tween the playing device (source) and the receiving device.

Volume

To be able to control the source remotely, the playback de-

Youcanusethe

/ (5/6) buttons on the device, or

vicemustsupporttheAVRCPprole(Audio Video Remote

V-/AL1/V+/AL2(7)ontheremotecontroltosetthedesired

Control Profile).

volume.

Due to the different device manufacturers, models, and

software versions, a full functionality cannot be guaranteed.

Preset equalizer function

Differentsoundmodesareavailable(F=FLAT,C=CLASSIC,

Logging on devices (Pairing)

r=ROCK,P=POP,J=JAZZ).Toselectthesoundmodes,

Before you listen to music via the unit, you must pair the

proceed as follows:

devices.

1. Press the

button (7) for about 3 seconds. The currently

set sound mode will be displayed.