AEG mc 4461 bt: English

50

English

3. “----”appearsbrieyonthedisplay.Thenumberof

Setting of the alarm time

tracks will then be shown.

Youhavetheoptionofsettingtwoalarmtimes.Proceedas

4. Playback then begins. The current track, MP3 and the

follows:

elapsed playing time is shown on the display

1. PresstheV+/AL1buttonforabout3seconds.Thehours

For operating instructions please see the section “Description

ofthecurrentlysetalarmtimewillstarttoash.

of the controls”.

2. Perform the settings with the

and buttons.

3. PresstheV+/AL1buttontoconrm.Theminuteswillstart

NOTE:

toash.

• Alwaysdirectly connect a USB storage medium to the

4. Perform the settings with the and buttons.

USB port to prevent any malfunctions.

5. PresstheV+/AL1buttontoconrm.Thenchoosehow

• TheUSBportisalsosuitableforchargingyoursmart-

you would like to be woken up. Perform the settings with

phone. Use the USB cable from your smartphone

the and buttons.

for the connection. Due to the different smartphone

The selection is as follows:

models that are offered nowadays and their different

• FM:

charging capacities, the charging duration depends on

 Assoonasthesetalarmtimehasbeenreached,the

the smartphones used and their operating mode.

radio will turn on. The last preset station will play.

The volume will slowly increase to the factory default

CAUTION:

volume.

Before you remove the USB storage medium, use the

/

• MP3 (CD):

FUNCTION/FUNCbuttontoswitchtheunittoRADIOor

 Assoonasthesetalarmtimehasbeenreached,the

CD.

device will turn on in CD mode. The inserted CD will

be played from the first track. The volume will slowly

AUX jack (Back of the unit)

increase to the factory default volume.

Connect analogue playback devices. When connecting to

• USB:

this jack you may also listen to the audio of other devices,

 Assoonasthesetalarmtimehasbeenreached,the

such as MP3 or CD players etc., via the speakers.

device will turn on in USB mode. The tracks of the

connected storage device will be played from the first

1. Pleaseconnecttheexternaldevicevia3.5mmplugjack

track. The volume will slowly increase to the factory

totheAUXjack.

default volume.

2. Now use

/FUNCTION / FUNC button (11/1) to select

• (Signaling tone):

AUXmode.

3. Youcanhearthesoundfromtheexternaldevicethrough

 Abuzzerwillsoundwhenreachingthealarmtime.

theloudspeakers.Youcanusethebuttons(5/6/7)to

The volume will slowly increase to the factory default

adjust the volume. The CD buttons are not active.

volume.

4. For further functions please refer to the user manual of

6. Finally,pressthebuttonV+/AL1onemoretime.Therst

theexternalaudiodevice.

alarm time is now activated.

To set the second alarm time, repeat each of the above steps

NOTE:

withtheVOL-/AL2button(6).

Setthevolumeoftheexternaldevicetoaproperaudible

level.

NOTE:

When the alarm time is activated, the correct symbol (

or

Alarm Function

) will be lit.

General Information

Turning off of the alarm signal.

• Thealarmtimescanonlybesetwhenthedeviceisin

Wereyouwokenup?Toturnoffthealarmsignaluntilthe

standby.

nextday,pressthe

/FUNCTION button (11/9).

• Wouldyouliketobewokenupwithradio?Setthestation

in advance that you would like to be woken up with.

Automatic snooze function

• WouldyouliketobewokenupwithCDorUSB?Inserta

CD, or connect a USB storage device to the USB port.

The automatically set alarm function can be switched off with

• Oncethealarmtimehasbeenreached,thesymbolwill

the SNOOZE button (16) for about 9 minutes.

ashfortherstorsecondalarmtime.

NOTE:

• Thesettingofthealarmtimeisdescribedwiththebut-

The activated function is shown in the display through the

tons of the remote control.

“SNOOZE” notification.